Manjaro - User contributions [en]

Manjaro-ARM/zh-cn

2022-12-05T18:32:28Z

Ameneko:

<languages/>
__TOC__

=简介=

用于 ARM 设备的 Manjaro 发行版。

基于Arch Linux ARM版，就像Pinebook和树莓派上的一样，打包了 Manjaro工具、主题和为您ARM设备制作安装镜像的基础工具。

<div style="clear: both"></div>

=安装=

===下载===

你可以在 [https://manjaro.org/download/#ARM Manjaro 网站] 的下载区或 [https://osdn.net/projects/manjaro-arm/ OSDN] 找到安装镜像。 
找到你想要的，符合你的设备的版本。

===写入安装媒介===

镜像文件在用 .xz 结尾的文件中。这种文件可以直接用 Etcher 或者 dd 写入到 SD 卡中。 
如何用 dd 命令手动安装到你的 SD 卡：

提取镜像。

unxz Manjaro-ARM-[发行版本]-[设备]-[版本号].xz

将其导入 SD 卡

sudo dd if=Manjaro-ARM-[发行版本]-[设备]-[版本号].img of=/dev/[device] bs=4M
Where ''[device]'' is your SD card's device, as seen by lsblk. Usually mmcblk0 or sdb.

===第一次启动和清理工作===
一旦把镜像写入到 SD 卡上，你就应该可以把卡插到设备上启动了。如果一切正常，设备会被引导到 OEM 设置。在这里，你可以设置你的用户名、密码和区域等。设置完成后，脚本会自动清理、调整分区大小并重启。重启后，根据你安装的版本进入操作系统（可能是简单的 TTY 登录或桌面环境登录）。

===Resizing the partitions===
Since 18.09 this is now done automatically. The device will boot to OEM setup, which will handle the resizing, and then reboot before the login screen would appear. When it's booted to the login screen, the filesystem has been resized to fill out the remaining space on the SD card.

===登陆===
Login depends on what you set up during the OEM setup.
There are 1 users by default on the image. root.
And by default it has no password and autologin enabled.
This gets changed when the OEM script is run, to disable the autologin and set the password defined during the setup.
=支持的设备=

==Hardkernel==
{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="4" | Hardkernel
|-
| style="width: 12%"|
Model
| Odroid-C2
| Odroid-C4
| Odroid-N2
| Odroid-N2+
|-
| Release Year
| 2016
| 2020
| 2019
| 2020
|-
| SoC Manufacturer
| Amlogic
| Amlogic
| Amlogic
| Amlogic
|-
| Lithography
| 28nm
| 12nm
| 12nm
| 12nm
|-
| CPU
| S905
| S905X3
| S922X
| S922X
|-
| CPU Topology
| Quad-core: 4 x Cortex-A53
| Quad-core: 4 x Cortex-A55
| Hexa-core: 4 x Cortex-A73 2 x Cortex-A53
| Hexa-core: 4 x Cortex-A73 2 x Cortex-A53
|-
| CPU Frequency
| 4 x 1.5GHz
| 4 x 2.0GHz
| 4 x 2.0GHz 2 x 1.8GHz
| 4 x 2.4GHz 2 x 1.9GHz
|-
| GPU
| Mali-450 MP3
| Mali-G31 MP2
| Mali-G52 MP4
| Mali-G52 MP4
|-
| Memory
| 2GB DDR3
| 4GB DDR4
| 2–4GB DDR4
| 2–4GB DDR4
|}

==Khadas==

{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="4" | Khadas
|-
| style="width: 12%"|
Model
| Edge-V
| Vim 1
| Vim 2
| Vim 3
|-
| Release Year
| 2018
| 2016
| 2017
| 2019
|-
| SoC Manufacturer
| Rockchip
| Amlogic
| Amlogic
| Amlogic
|-
| Lithography
| 28nm
| 28nm
| 28nm
| 12nm
|-
| CPU
| RK3399
| S905X
| S912
| A311D
|-
| CPU Topology
| Hexa-core: 2 x Cortex-A72 4 x Cortex-A53
| Quad-core: 4 x Cortex-A53
| Octa-core: 8 x Cortex-A53
| Hexa-core: 4 x Cortex-A73 2 x Cortex-A53
|-
| CPU Frequency
| 2 x 1.8GHz 4 x 1.5GHz
| 4 x 1.5GHz
| 8 x 1.5GHz
| 4 x 2.2GHz 2 x 1.8GHz
|-
| GPU
| Mali-T860 MP4
| Mali-450 MP3
| Mali-T820 MP3
| Mali-G52 MP4
|-
| Memory
| 2–4GB LPDDR4
| 2GB DDR3
| 2–3GB LPDDR4
| 2–4GB LPDDR4
|}

==Pine64==

{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="5" | Pine64
|-
| style="width: 12%"|
Model
| Rock64
| RockPro64
| Pinebook
| Pinebook Pro
| PinePhone
|-
| Release Year
| 2017
| 2017
| 2017
| 2019
| 2019
|-
| SoC Manufacturer
| Rockchip
| Rockchip
| Allwinner
| Rockchip
| Allwinner
|-
| Lithography
| 28nm
| 28nm
| 40nm
| 28nm
| 40nm
|-
| CPU
| RK3328
| RK3399
| A64
| RK3399
| A64
|-
| CPU Topology
| Quad-core: 4 x Cortex-A53
| Hexa-core: 2 x Cortex-A72 4 x Cortex-A53
| Quad-core: 4 x Cortex-A53
| Hexa-core: 2 x Cortex-A72 4 x Cortex-A53
| Quad-core: 4 x Cortex-A53
|-
| CPU Frequency
| 4 x 1.5GHz
| 2 x 2.0GHz 4 x 1.5GHz
| 4 x 1.152GHz
| 2 x 2.0GHz 4 x 1.5GHz
| 4 x 1.2GHz
|-
| GPU
| Mali-450 MP2
| Mali-T860 MP4
| Mali-400 MP2
| Mali-T860 MP4
| Mali-400 MP2
|-
| Memory
| 1–4GB LPDDR3
| 2–4GB LPDDR4
| 2GB LPDDR3
| 4GB LPDDR4
| 2–3GB LPDDR3
|}

==Radxa==

{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="1" | Radxa
|-
| style="width: 12%"|
Model
| Rock Pi 4
|-
| Release Year
| 2019
|-
| SoC Manufacturer
| Rockchip
|-
| Lithography
| 28nm
|-
| CPU
| RK3399
|-
| CPU Topology
| Hexa-core: 2 x Cortex-A72 4 x Cortex-A53
|-
| CPU Frequency
| 2 x 2.0GHz 4 x 1.5GHz
|-
| GPU
| Mali-T860 MP4
|-
| Memory
| 1–4GB LPDDR4
|}

==Raspberry==

{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="4" | Raspberry
|-
| style="width: 12%"|
Model
| Pi 3B
| Pi 3B+
| Pi 4B
| Pi 400
|-
| Release Year
| 2016
| 2018
| 2019
| 2020
|-
| SoC Manufacturer
| Broadcom
| Broadcom
| Broadcom
| Broadcom
|-
| Lithography
| 28nm
| 28nm
| 28nm
| 28nm
|-
| CPU
| BCM2837
| BCM2837B0
| BCM2711
| BCM2711
|-
| CPU Topology
| Quad-core: 4 x Cortex-A53
| Quad-core: 4 x Cortex-A53
| Quad-core: 4 x Cortex-A72
| Quad-core: 4 x Cortex-A72
|-
| CPU Frequency
| 4 x 1.2GHz
| 4 x 1.4GHz
| 4 x 1.5GHz
| 4 x 1.5GHz
|-
| GPU
| VideoCore IV
| VideoCore IV
| VideoCore VI
| VideoCore VI
|-
| Memory
| 1GB LPDDR2
| 1GB LPDDR2
| 1–8GB LPDDR4
| 4GB LPDDR4
|}

===Raspberry Pi===

====传感器====

For temperature and humidity sensor see this tutorial on the forums: https://forum.manjaro.org/t/howto-raspberry-pi-temperature-and-humidity-sensor-dht22-dht11-am2302/34685

====超频====

You can manage voltage and frequency settings in your <code>/boot/config.txt</code>. The following are the most common values for the Raspberry Pi:
<pre>
over_voltage=6
arm_freq=2100
gpu_freq=650
</pre>

===故障排除===

====Pi 400 Power Button====

If you have trouble using the power button on your Pi 400 with the XFCE desktop (or xfce4-power-manager) then make sure logind is handling button events:
xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/logind-handle-power-key -n -t bool -s true

====阻止更新====

There are device-dependent workarounds if you experience an error similar to:
<pre>
error: failed to prepare transaction (conflicting dependencies)
:: brcm-patchram-plus and pi-bluetooth are in conflict
</pre>

For the '''Pi 3B''':

sudo systemctl disable brcm43438.service
sudo pacman -S -dd brcm-patchram-plus-pi3b firmware-raspberrypi
sudo systemctl enable attach-bluetooth-pi3.service

For the '''Pi 3B+''':

sudo systemctl disable brcm43438.service
sudo pacman -S -dd brcm-patchram-plus firmware-raspberrypi
sudo systemctl enable attach-bluetooth.service

For the '''Pi 4B''':

sudo systemctl disable brcm43438.service
sudo pacman -S -dd brcm-patchram-plus firmware-raspberrypi
sudo systemctl enable attach-bluetooth.service

For the '''Pi 400''':

sudo systemctl disable brcm43438.service
sudo pacman -S -dd brcm-patchram-plus-pi400 firmware-raspberrypi
sudo systemctl enable attach-bluetooth-pi400.service

====Missing Bluetooth after raspberrypi-bootloader/-x update 20210208-1====

首先，检查引导程序是否已经更新：
pacman -Ss raspberrypi-bootloader

可能会出现的结果：
core/raspberrypi-bootloader '''20210208-1''' [installed]
Bootloader files for Raspberry Pi
core/raspberrypi-bootloader-x '''20210208-1''' [installed]
Bootloader with extra codecs for Raspberry Pi

If it is the case, changing the occurrences of '''ttyAMA0''' in /boot/cmdline.txt to '''serial0''' may fix missing Bluetooth ([https://forum.manjaro.org/t/new-raspberry-pi-kernels-related-packages/4721/344 Source]).

==Android 电视盒子==

With a couple of small tweaks it is possible to boot and install the vim3 builds of Manjaro on some [[Amlogic TV boxes]]. Running Manjaro on TV boxes is not recommended for less experienced users of Linux nor serious production use.

=另见=
https://wiki.archlinux.org/index.php/Category:ARM_architecture 
https://archlinuxarm.org/wiki 
https://osdn.net/projects/manjaro-arm/ 
 

[[Category:Contents Page{{#translation:}}]]
[[Category:ARM{{#translation:}}]]

Manjaro-ARM/zh-cn

2022-12-05T18:32:12Z

Ameneko:

<languages/>
__TOC__

=简介=

用于 ARM 设备的 Manjaro 发行版。

基于Arch Linux ARM版，就像Pinebook和树莓派上的一样，打包了 Manjaro工具、主题和为您ARM设备制作安装镜像的基础工具。

<div style="clear: both"></div>

=安装=

===下载===

你可以在 [https://manjaro.org/download/#ARM Manjaro 网站] 的下载区或 [https://osdn.net/projects/manjaro-arm/ OSDN] 找到安装镜像。 
找到你想要的，符合你的设备的版本。

===写入安装媒介===

镜像文件在用 .xz 结尾的文件中。这种文件可以直接用 Etcher 或者 dd 写入到 SD 卡中。 
如何用 dd 命令手动安装到你的 SD 卡：

提取镜像。

unxz Manjaro-ARM-[发行版本]-[设备]-[版本号].xz

将其导入 SD 卡

sudo dd if=Manjaro-ARM-[发行版本]-[设备]-[版本号].img of=/dev/[device] bs=4M
Where ''[device]'' is your SD card's device, as seen by lsblk. Usually mmcblk0 or sdb.

===Cleanup and First Boot===
Once you have the image on the SDCard, you should be able to put the card into your device and plug it in. If everything worked correctly, it should boot to the OEM setup. Here you define your username, passwords locales etc. Once that is done, the script will clean up after itself, resize the partition and reboot the device. After that reboot, it should boot to the Operating System Depending on the edition you have installed, this could be a simple TTY login or a graphical desktop environment.

===Resizing the partitions===
Since 18.09 this is now done automatically. The device will boot to OEM setup, which will handle the resizing, and then reboot before the login screen would appear. When it's booted to the login screen, the filesystem has been resized to fill out the remaining space on the SD card.

===登陆===
Login depends on what you set up during the OEM setup.
There are 1 users by default on the image. root.
And by default it has no password and autologin enabled.
This gets changed when the OEM script is run, to disable the autologin and set the password defined during the setup.
=支持的设备=

==Hardkernel==
{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="4" | Hardkernel
|-
| style="width: 12%"|
Model
| Odroid-C2
| Odroid-C4
| Odroid-N2
| Odroid-N2+
|-
| Release Year
| 2016
| 2020
| 2019
| 2020
|-
| SoC Manufacturer
| Amlogic
| Amlogic
| Amlogic
| Amlogic
|-
| Lithography
| 28nm
| 12nm
| 12nm
| 12nm
|-
| CPU
| S905
| S905X3
| S922X
| S922X
|-
| CPU Topology
| Quad-core: 4 x Cortex-A53
| Quad-core: 4 x Cortex-A55
| Hexa-core: 4 x Cortex-A73 2 x Cortex-A53
| Hexa-core: 4 x Cortex-A73 2 x Cortex-A53
|-
| CPU Frequency
| 4 x 1.5GHz
| 4 x 2.0GHz
| 4 x 2.0GHz 2 x 1.8GHz
| 4 x 2.4GHz 2 x 1.9GHz
|-
| GPU
| Mali-450 MP3
| Mali-G31 MP2
| Mali-G52 MP4
| Mali-G52 MP4
|-
| Memory
| 2GB DDR3
| 4GB DDR4
| 2–4GB DDR4
| 2–4GB DDR4
|}

==Khadas==

{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="4" | Khadas
|-
| style="width: 12%"|
Model
| Edge-V
| Vim 1
| Vim 2
| Vim 3
|-
| Release Year
| 2018
| 2016
| 2017
| 2019
|-
| SoC Manufacturer
| Rockchip
| Amlogic
| Amlogic
| Amlogic
|-
| Lithography
| 28nm
| 28nm
| 28nm
| 12nm
|-
| CPU
| RK3399
| S905X
| S912
| A311D
|-
| CPU Topology
| Hexa-core: 2 x Cortex-A72 4 x Cortex-A53
| Quad-core: 4 x Cortex-A53
| Octa-core: 8 x Cortex-A53
| Hexa-core: 4 x Cortex-A73 2 x Cortex-A53
|-
| CPU Frequency
| 2 x 1.8GHz 4 x 1.5GHz
| 4 x 1.5GHz
| 8 x 1.5GHz
| 4 x 2.2GHz 2 x 1.8GHz
|-
| GPU
| Mali-T860 MP4
| Mali-450 MP3
| Mali-T820 MP3
| Mali-G52 MP4
|-
| Memory
| 2–4GB LPDDR4
| 2GB DDR3
| 2–3GB LPDDR4
| 2–4GB LPDDR4
|}

==Pine64==

{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="5" | Pine64
|-
| style="width: 12%"|
Model
| Rock64
| RockPro64
| Pinebook
| Pinebook Pro
| PinePhone
|-
| Release Year
| 2017
| 2017
| 2017
| 2019
| 2019
|-
| SoC Manufacturer
| Rockchip
| Rockchip
| Allwinner
| Rockchip
| Allwinner
|-
| Lithography
| 28nm
| 28nm
| 40nm
| 28nm
| 40nm
|-
| CPU
| RK3328
| RK3399
| A64
| RK3399
| A64
|-
| CPU Topology
| Quad-core: 4 x Cortex-A53
| Hexa-core: 2 x Cortex-A72 4 x Cortex-A53
| Quad-core: 4 x Cortex-A53
| Hexa-core: 2 x Cortex-A72 4 x Cortex-A53
| Quad-core: 4 x Cortex-A53
|-
| CPU Frequency
| 4 x 1.5GHz
| 2 x 2.0GHz 4 x 1.5GHz
| 4 x 1.152GHz
| 2 x 2.0GHz 4 x 1.5GHz
| 4 x 1.2GHz
|-
| GPU
| Mali-450 MP2
| Mali-T860 MP4
| Mali-400 MP2
| Mali-T860 MP4
| Mali-400 MP2
|-
| Memory
| 1–4GB LPDDR3
| 2–4GB LPDDR4
| 2GB LPDDR3
| 4GB LPDDR4
| 2–3GB LPDDR3
|}

==Radxa==

{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="1" | Radxa
|-
| style="width: 12%"|
Model
| Rock Pi 4
|-
| Release Year
| 2019
|-
| SoC Manufacturer
| Rockchip
|-
| Lithography
| 28nm
|-
| CPU
| RK3399
|-
| CPU Topology
| Hexa-core: 2 x Cortex-A72 4 x Cortex-A53
|-
| CPU Frequency
| 2 x 2.0GHz 4 x 1.5GHz
|-
| GPU
| Mali-T860 MP4
|-
| Memory
| 1–4GB LPDDR4
|}

==Raspberry==

{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="4" | Raspberry
|-
| style="width: 12%"|
Model
| Pi 3B
| Pi 3B+
| Pi 4B
| Pi 400
|-
| Release Year
| 2016
| 2018
| 2019
| 2020
|-
| SoC Manufacturer
| Broadcom
| Broadcom
| Broadcom
| Broadcom
|-
| Lithography
| 28nm
| 28nm
| 28nm
| 28nm
|-
| CPU
| BCM2837
| BCM2837B0
| BCM2711
| BCM2711
|-
| CPU Topology
| Quad-core: 4 x Cortex-A53
| Quad-core: 4 x Cortex-A53
| Quad-core: 4 x Cortex-A72
| Quad-core: 4 x Cortex-A72
|-
| CPU Frequency
| 4 x 1.2GHz
| 4 x 1.4GHz
| 4 x 1.5GHz
| 4 x 1.5GHz
|-
| GPU
| VideoCore IV
| VideoCore IV
| VideoCore VI
| VideoCore VI
|-
| Memory
| 1GB LPDDR2
| 1GB LPDDR2
| 1–8GB LPDDR4
| 4GB LPDDR4
|}

===Raspberry Pi===

====传感器====

For temperature and humidity sensor see this tutorial on the forums: https://forum.manjaro.org/t/howto-raspberry-pi-temperature-and-humidity-sensor-dht22-dht11-am2302/34685

====超频====

You can manage voltage and frequency settings in your <code>/boot/config.txt</code>. The following are the most common values for the Raspberry Pi:
<pre>
over_voltage=6
arm_freq=2100
gpu_freq=650
</pre>

===故障排除===

====Pi 400 Power Button====

If you have trouble using the power button on your Pi 400 with the XFCE desktop (or xfce4-power-manager) then make sure logind is handling button events:
xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/logind-handle-power-key -n -t bool -s true

====阻止更新====

There are device-dependent workarounds if you experience an error similar to:
<pre>
error: failed to prepare transaction (conflicting dependencies)
:: brcm-patchram-plus and pi-bluetooth are in conflict
</pre>

For the '''Pi 3B''':

sudo systemctl disable brcm43438.service
sudo pacman -S -dd brcm-patchram-plus-pi3b firmware-raspberrypi
sudo systemctl enable attach-bluetooth-pi3.service

For the '''Pi 3B+''':

sudo systemctl disable brcm43438.service
sudo pacman -S -dd brcm-patchram-plus firmware-raspberrypi
sudo systemctl enable attach-bluetooth.service

For the '''Pi 4B''':

sudo systemctl disable brcm43438.service
sudo pacman -S -dd brcm-patchram-plus firmware-raspberrypi
sudo systemctl enable attach-bluetooth.service

For the '''Pi 400''':

sudo systemctl disable brcm43438.service
sudo pacman -S -dd brcm-patchram-plus-pi400 firmware-raspberrypi
sudo systemctl enable attach-bluetooth-pi400.service

====Missing Bluetooth after raspberrypi-bootloader/-x update 20210208-1====

首先，检查引导程序是否已经更新：
pacman -Ss raspberrypi-bootloader

可能会出现的结果：
core/raspberrypi-bootloader '''20210208-1''' [installed]
Bootloader files for Raspberry Pi
core/raspberrypi-bootloader-x '''20210208-1''' [installed]
Bootloader with extra codecs for Raspberry Pi

If it is the case, changing the occurrences of '''ttyAMA0''' in /boot/cmdline.txt to '''serial0''' may fix missing Bluetooth ([https://forum.manjaro.org/t/new-raspberry-pi-kernels-related-packages/4721/344 Source]).

==Android 电视盒子==

With a couple of small tweaks it is possible to boot and install the vim3 builds of Manjaro on some [[Amlogic TV boxes]]. Running Manjaro on TV boxes is not recommended for less experienced users of Linux nor serious production use.

=另见=
https://wiki.archlinux.org/index.php/Category:ARM_architecture 
https://archlinuxarm.org/wiki 
https://osdn.net/projects/manjaro-arm/ 
 

[[Category:Contents Page{{#translation:}}]]
[[Category:ARM{{#translation:}}]]

Translations:Manjaro-ARM/14/zh-cn

2022-09-02T03:41:23Z

Ameneko:

===第一次启动和清理工作===
一旦把镜像写入到 SD 卡上，你就应该可以把卡插到设备上启动了。如果一切正常，设备会被引导到 OEM 设置。在这里，你可以设置你的用户名、密码和区域等。设置完成后，脚本会自动清理、调整分区大小并重启。重启后，根据你安装的版本进入操作系统（可能是简单的 TTY 登录或桌面环境登录）。

Translations:Manjaro-ARM/9/zh-cn

2022-09-02T03:05:29Z

Ameneko:

镜像文件在用 .xz 结尾的文件中。这种文件可以直接用 Etcher 或者 dd 写入到 SD 卡中。 
如何用 dd 命令手动安装到你的 SD 卡：

Translations:Manjaro-ARM/8/zh-cn

2022-09-02T03:00:59Z

Ameneko:

===写入安装媒介===

"What should I be aware of if I'm not on an LTS kernel?"/zh-cn

2022-05-22T01:56:00Z

Ameneko: Created page with "“如果我没有使用LTS内核，我应该注意什么？”"

<languages/>
<div lang="en" dir="ltr" class="mw-content-ltr">
== What should I be aware of if I'm not on an LTS kernel? ==
* "Stable"and "Release Candidate" (RC) kernels are *Development* kernels
* They have the newest, shiniest features but are not as rock-solid as LTS kernels :man_shrugging:
* These kernels become End of Life (EOL) much quicker than LTS kernels, so you should keep an eye on:
1. The Manjaro #announcements
OR
2. Linus Torvald's [https://kernel.org kernel page] to know when your shiny new genie will go "poof" back into its bottle. 🧞 🪔
* If you're on a RC kernel, update frequently and stay on that kernel once it becomes stable
* If you're on a Stable kernel, install a higher version Stable kernel ''the moment it gets releases as '''Stable''''' (so don't jump on the RC kernel bandwagon: these are ''less stable than what you've got already'')
* Shut down or reboot your machine at least once per day. (Like Windows: that's as unstable as a RC Linux kernel) 😂
* '''Manjaro is one of the few distros that supports Stable and RC kernels''' so live with a bit of frustration if things go a bit wonky every now and then and certainly don't install Ubuntu or Mint or RHEL as they will just not support any of this.
</div>


[[Category:Contents page{{#translation:}}]]

Manjaro-ARM/zh-cn

2022-05-22T01:55:47Z

Ameneko:

<languages/>
__TOC__

=简介=

用于 ARM 设备的 Manjaro 发行版。

基于Arch Linux ARM版，就像Pinebook和树莓派上的一样，打包了 Manjaro工具、主题和为您ARM设备制作安装镜像的基础工具。

<div style="clear: both"></div>

=安装=

===下载===

你可以在 [https://manjaro.org/download/#ARM Manjaro 网站] 的下载区或 [https://osdn.net/projects/manjaro-arm/ OSDN] 找到安装镜像。 
找到你想要的，符合你的设备的版本。

===Writing the Installation Media===

The images are in a .xz file. These files can be burned directly to an SD card with Etcher or with dd directly. 
To manually install to your SD card with dd:

提取镜像。

unxz Manjaro-ARM-[发行版本]-[设备]-[版本号].xz

将其导入 SD 卡

sudo dd if=Manjaro-ARM-[发行版本]-[设备]-[版本号].img of=/dev/[device] bs=4M
Where ''[device]'' is your SD card's device, as seen by lsblk. Usually mmcblk0 or sdb.

===Cleanup and First Boot===
Once you have the image on the SDCard, you should be able to put the card into your device and plug it in. If everything worked correctly, it should boot to the OEM setup. Here you define your username, passwords locales etc. Once that is done, the script will clean up after itself, resize the partition and reboot the device. After that reboot, it should boot to the Operating System Depending on the edition you have installed, this could be a simple TTY login or a graphical desktop environment.

===Resizing the partitions===
Since 18.09 this is now done automatically. The device will boot to OEM setup, which will handle the resizing, and then reboot before the login screen would appear. When it's booted to the login screen, the filesystem has been resized to fill out the remaining space on the SD card.

===登陆===
Login depends on what you set up during the OEM setup.
There are 1 users by default on the image. root.
And by default it has no password and autologin enabled.
This gets changed when the OEM script is run, to disable the autologin and set the password defined during the setup.
=支持的设备=

==Hardkernel==
{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="4" | Hardkernel
|-
| style="width: 12%"|
Model
| Odroid-C2
| Odroid-C4
| Odroid-N2
| Odroid-N2+
|-
| Release Year
| 2016
| 2020
| 2019
| 2020
|-
| SoC Manufacturer
| Amlogic
| Amlogic
| Amlogic
| Amlogic
|-
| Lithography
| 28nm
| 12nm
| 12nm
| 12nm
|-
| CPU
| S905
| S905X3
| S922X
| S922X
|-
| CPU Topology
| Quad-core: 4 x Cortex-A53
| Quad-core: 4 x Cortex-A55
| Hexa-core: 4 x Cortex-A73 2 x Cortex-A53
| Hexa-core: 4 x Cortex-A73 2 x Cortex-A53
|-
| CPU Frequency
| 4 x 1.5GHz
| 4 x 2.0GHz
| 4 x 2.0GHz 2 x 1.8GHz
| 4 x 2.4GHz 2 x 1.9GHz
|-
| GPU
| Mali-450 MP3
| Mali-G31 MP2
| Mali-G52 MP4
| Mali-G52 MP4
|-
| Memory
| 2GB DDR3
| 4GB DDR4
| 2–4GB DDR4
| 2–4GB DDR4
|}

==Khadas==

{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="4" | Khadas
|-
| style="width: 12%"|
Model
| Edge-V
| Vim 1
| Vim 2
| Vim 3
|-
| Release Year
| 2018
| 2016
| 2017
| 2019
|-
| SoC Manufacturer
| Rockchip
| Amlogic
| Amlogic
| Amlogic
|-
| Lithography
| 28nm
| 28nm
| 28nm
| 12nm
|-
| CPU
| RK3399
| S905X
| S912
| A311D
|-
| CPU Topology
| Hexa-core: 2 x Cortex-A72 4 x Cortex-A53
| Quad-core: 4 x Cortex-A53
| Octa-core: 8 x Cortex-A53
| Hexa-core: 4 x Cortex-A73 2 x Cortex-A53
|-
| CPU Frequency
| 2 x 1.8GHz 4 x 1.5GHz
| 4 x 1.5GHz
| 8 x 1.5GHz
| 4 x 2.2GHz 2 x 1.8GHz
|-
| GPU
| Mali-T860 MP4
| Mali-450 MP3
| Mali-T820 MP3
| Mali-G52 MP4
|-
| Memory
| 2–4GB LPDDR4
| 2GB DDR3
| 2–3GB LPDDR4
| 2–4GB LPDDR4
|}

==Pine64==

{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="5" | Pine64
|-
| style="width: 12%"|
Model
| Rock64
| RockPro64
| Pinebook
| Pinebook Pro
| PinePhone
|-
| Release Year
| 2017
| 2017
| 2017
| 2019
| 2019
|-
| SoC Manufacturer
| Rockchip
| Rockchip
| Allwinner
| Rockchip
| Allwinner
|-
| Lithography
| 28nm
| 28nm
| 40nm
| 28nm
| 40nm
|-
| CPU
| RK3328
| RK3399
| A64
| RK3399
| A64
|-
| CPU Topology
| Quad-core: 4 x Cortex-A53
| Hexa-core: 2 x Cortex-A72 4 x Cortex-A53
| Quad-core: 4 x Cortex-A53
| Hexa-core: 2 x Cortex-A72 4 x Cortex-A53
| Quad-core: 4 x Cortex-A53
|-
| CPU Frequency
| 4 x 1.5GHz
| 2 x 2.0GHz 4 x 1.5GHz
| 4 x 1.152GHz
| 2 x 2.0GHz 4 x 1.5GHz
| 4 x 1.2GHz
|-
| GPU
| Mali-450 MP2
| Mali-T860 MP4
| Mali-400 MP2
| Mali-T860 MP4
| Mali-400 MP2
|-
| Memory
| 1–4GB LPDDR3
| 2–4GB LPDDR4
| 2GB LPDDR3
| 4GB LPDDR4
| 2–3GB LPDDR3
|}

==Radxa==

{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="1" | Radxa
|-
| style="width: 12%"|
Model
| Rock Pi 4
|-
| Release Year
| 2019
|-
| SoC Manufacturer
| Rockchip
|-
| Lithography
| 28nm
|-
| CPU
| RK3399
|-
| CPU Topology
| Hexa-core: 2 x Cortex-A72 4 x Cortex-A53
|-
| CPU Frequency
| 2 x 2.0GHz 4 x 1.5GHz
|-
| GPU
| Mali-T860 MP4
|-
| Memory
| 1–4GB LPDDR4
|}

==Raspberry==

{| class="wikitable" style="text-align: center;width: 100%;"-- Header -->
!  
! colspan="4" | Raspberry
|-
| style="width: 12%"|
Model
| Pi 3B
| Pi 3B+
| Pi 4B
| Pi 400
|-
| Release Year
| 2016
| 2018
| 2019
| 2020
|-
| SoC Manufacturer
| Broadcom
| Broadcom
| Broadcom
| Broadcom
|-
| Lithography
| 28nm
| 28nm
| 28nm
| 28nm
|-
| CPU
| BCM2837
| BCM2837B0
| BCM2711
| BCM2711
|-
| CPU Topology
| Quad-core: 4 x Cortex-A53
| Quad-core: 4 x Cortex-A53
| Quad-core: 4 x Cortex-A72
| Quad-core: 4 x Cortex-A72
|-
| CPU Frequency
| 4 x 1.2GHz
| 4 x 1.4GHz
| 4 x 1.5GHz
| 4 x 1.5GHz
|-
| GPU
| VideoCore IV
| VideoCore IV
| VideoCore VI
| VideoCore VI
|-
| Memory
| 1GB LPDDR2
| 1GB LPDDR2
| 1–8GB LPDDR4
| 4GB LPDDR4
|}

===Raspberry Pi===

====传感器====

For temperature and humidity sensor see this tutorial on the forums: https://forum.manjaro.org/t/howto-raspberry-pi-temperature-and-humidity-sensor-dht22-dht11-am2302/34685

====超频====

You can manage voltage and frequency settings in your <code>/boot/config.txt</code>. The following are the most common values for the Raspberry Pi:
<pre>
over_voltage=6
arm_freq=2100
gpu_freq=650
</pre>

===故障排除===

====Pi 400 Power Button====

If you have trouble using the power button on your Pi 400 with the XFCE desktop (or xfce4-power-manager) then make sure logind is handling button events:
xfconf-query -c xfce4-power-manager -p /xfce4-power-manager/logind-handle-power-key -n -t bool -s true

====阻止更新====

There are device-dependent workarounds if you experience an error similar to:
<pre>
error: failed to prepare transaction (conflicting dependencies)
:: brcm-patchram-plus and pi-bluetooth are in conflict
</pre>

For the '''Pi 3B''':

sudo systemctl disable brcm43438.service
sudo pacman -S -dd brcm-patchram-plus-pi3b firmware-raspberrypi
sudo systemctl enable attach-bluetooth-pi3.service

For the '''Pi 3B+''':

sudo systemctl disable brcm43438.service
sudo pacman -S -dd brcm-patchram-plus firmware-raspberrypi
sudo systemctl enable attach-bluetooth.service

For the '''Pi 4B''':

sudo systemctl disable brcm43438.service
sudo pacman -S -dd brcm-patchram-plus firmware-raspberrypi
sudo systemctl enable attach-bluetooth.service

For the '''Pi 400''':

sudo systemctl disable brcm43438.service
sudo pacman -S -dd brcm-patchram-plus-pi400 firmware-raspberrypi
sudo systemctl enable attach-bluetooth-pi400.service

====Missing Bluetooth after raspberrypi-bootloader/-x update 20210208-1====

首先，检查引导程序是否已经更新：
pacman -Ss raspberrypi-bootloader

可能会出现的结果：
core/raspberrypi-bootloader '''20210208-1''' [installed]
Bootloader files for Raspberry Pi
core/raspberrypi-bootloader-x '''20210208-1''' [installed]
Bootloader with extra codecs for Raspberry Pi

If it is the case, changing the occurrences of '''ttyAMA0''' in /boot/cmdline.txt to '''serial0''' may fix missing Bluetooth ([https://forum.manjaro.org/t/new-raspberry-pi-kernels-related-packages/4721/344 Source]).

==Android 电视盒子==

With a couple of small tweaks it is possible to boot and install the vim3 builds of Manjaro on some [[Amlogic TV boxes]]. Running Manjaro on TV boxes is not recommended for less experienced users of Linux nor serious production use.

=另见=
https://wiki.archlinux.org/index.php/Category:ARM_architecture 
https://archlinuxarm.org/wiki 
https://osdn.net/projects/manjaro-arm/ 
 

[[Category:Contents Page{{#translation:}}]]
[[Category:ARM{{#translation:}}]]

BIOS and UEFI/zh-cn

2022-05-22T01:56:03Z

Ameneko: Add link to the correct page

<languages/>
__TOC__
{{SectionTemplate|
1=统一可扩展固件接口（UEFI）|
2='''UEFI''' 与 Window 8 共同引进，用于替换/改进 BIOS 系统。这次改进的一大突破是，它允许计算机使用大于 2 TB（2000 GB）的硬盘。可惜的是，UEFI 也被微软和某些硬件制造商暗自操控，以阻止（或至少是使其变得难以操作）用其他系统更换或双启动 Windows 8 系统。
{{FlexSideContainerTemplate|
* [[Some basics of MBR v/s GPT and BIOS v/s UEFI|MBR 与 GPT 和 BIOS 与 UEFI 的基本内容]]
: ''阐明其中的差异。''|
* [[UEFI_-_Install_Guide|UEFI 安装指南]]
: ''在较新的 UEFI 系统下，指导安装 Manjaro 系统。''|1|1}}
}}

{{SectionTemplate|
1=基本输入输出系统（BIOS）|
2=在带有BIOS系统的电脑上，“GRUB”是用来管理并启动Linux操作系统的。这些通常都是比较老旧的，或者没有预装Windows 8的电脑。值得指出的是，在很多电脑上，通常有叫做“Leagcy Mode”（传统模式）的选项，可以用来关闭UEFI而使用BIOS引导。在引入了“UEFI”的Windows 8发布前发售和没有预装 Windows 8 （或之后系统）的电脑应该使用BIOS。
{{FlexSideContainerTemplate|
* [[Reactivating the Backlight|修复屏幕暗的问题]]
:''一个和BIOS相关的问题：你怎么敢删了Windows！''

* [[Virtualbox|让你的电脑可以使用虚拟机]]
: ''在BIOS设置中开启虚拟化功能''.|
* [[Restore the GRUB Bootloader|还原GRUB引导器]]
: 如果出现问题，你应该做...''
|1|1}}
}}

[[Category:Contents Page{{#translation:}}]]
[[Category:Grub{{#translation:}}]]

Translations:"What should I be aware of if I'm not on an LTS kernel?"/Page display title/zh-cn

2022-05-09T17:00:44Z

Ameneko: Created page with "“如果我没有使用LTS内核，我应该注意什么？”"

“如果我没有使用LTS内核，我应该注意什么？”

Translations:BIOS and UEFI/7/zh-cn

2022-05-09T16:58:00Z

Ameneko: Created page with "* 让你的电脑可以使用虚拟机 : ''在BIOS设置中开启虚拟化功能''.| * 还原GRUB引导器 : 如果出现问题..."

* [[Virtualbox|让你的电脑可以使用虚拟机]]
: ''在BIOS设置中开启虚拟化功能''.|
* [[Restore the GRUB Bootloader|还原GRUB引导器]]
: 如果出现问题，你应该做...''

Translations:BIOS and UEFI/3/zh-cn

2022-05-09T17:00:00Z

Ameneko: Add link to the correct page

* [[Some basics of MBR v/s GPT and BIOS v/s UEFI|MBR 与 GPT 和 BIOS 与 UEFI 的基本内容]]
: ''阐明其中的差异。''|
* [[UEFI_-_Install_Guide|UEFI 安装指南]]
: ''在较新的 UEFI 系统下，指导安装 Manjaro 系统。''

Translations:BIOS and UEFI/6/zh-cn

2022-05-09T16:52:20Z

Ameneko: Created page with "* 修复屏幕暗的问题 :''一个和BIOS相关的问题：你怎么敢删了Windows！''"

* [[Reactivating the Backlight|修复屏幕暗的问题]]
:''一个和BIOS相关的问题：你怎么敢删了Windows！''

Translations:BIOS and UEFI/5/zh-cn

2022-05-09T16:58:49Z

Ameneko: Created page with "在带有BIOS系统的电脑上，“GRUB”是用来管理并启动Linux操作系统的。这些通常都是比较老旧的，或者没有预装Windows 8的电脑。值得指..."

在带有BIOS系统的电脑上，“GRUB”是用来管理并启动Linux操作系统的。这些通常都是比较老旧的，或者没有预装Windows 8的电脑。值得指出的是，在很多电脑上，通常有叫做“Leagcy Mode”（传统模式）的选项，可以用来关闭UEFI而使用BIOS引导。在引入了“UEFI”的Windows 8发布前发售和没有预装 Windows 8 （或之后系统）的电脑应该使用BIOS。

Translations:BIOS and UEFI/4/zh-cn

2022-05-09T16:28:50Z

Ameneko: Created page with "基本输入输出系统（BIOS）"

基本输入输出系统（BIOS）

Translations:Manjaro-ARM/7/zh-cn

2022-05-09T16:22:00Z

Ameneko:

你可以在 [https://manjaro.org/download/#ARM Manjaro 网站] 的下载区或 [https://osdn.net/projects/manjaro-arm/ OSDN] 找到安装镜像。 
找到你想要的，符合你的设备的版本。

Translations:Manjaro-ARM/3/zh-cn

2022-05-09T16:19:26Z

Ameneko:

基于Arch Linux ARM版，就像Pinebook和树莓派上的一样，打包了 Manjaro工具、主题和为您ARM设备制作安装镜像的基础工具。