Manjaro Btrfs


From Manjaro
Revision as of 21:29, 18 September 2021 by Fabby (talk | contribs) (Corrected minor typos)

Page under construction

btrfs is a modern CoW file system

A modern Copy on Write file system for Linux aimed at implementing advanced features while also focusing on fault tolerance, repair and easy administration. Btrfs not only is a file system, but also is partly a volume manager, software-raid, backup-tool, and it is flash-friendly.

Because btrfs is different, some things seem unfamiliar and strange. Then is a good starting point to search for answers. Development of Btrfs started in 2007. Since that time, Btrfs is a part of the Linux kernel and is under active development. The Btrfs code base is stable . However, new features are still under development. Its main features and benefits are:

  • Snapshots which do not make the full copy of files
  • RAID - support for software-based RAID 0, RAID 1, RAID 10
  • Self-healing - checksums for data and metadata, automatic detection of silent data corruptionssee, Btrfs@ARC-wiki, Btrfs@wikipedia

why not btrfs ?

A lot of people say: "I don't use btrfs because it is experimental and is not stable. You can´t use it in production. It is not safe!".

not stable ?

Sure this is partly right. But please look for the date of such statements. Some seem to date from 10 years ago. So if you want to give btrfs a chance, you have to look for newer statements. Maybe even look at sure there is the best information regarding btrfs

experimental ?

Btrfs is feature-rich! And there are some features that are not implemented yet. Others are only partly implemented. Some are experimental and not suggested for production use. As is always the case in Linux-land you decide what to use, and so you are responsible for your own decisions.

not usable for production ?

  • Some Linux distributions do support btrfs as main file system
  • Some firms do use btrfs in
  • Some manufacturers do deploy devices where btrfs is used inside

difficult to repair ?

Indeed when you search for the usual ways to repair a file system like FAT or Ext4 then you don't find good information. But this is not because it is difficult to repair btrfs, but because repairing btrfs does work very different.

What's this "Copy on Write"

When you want to get the most out of using btrfs you do need to know some things about this file system. Then you are able to use it properly and to your advantage. btrfs is not difficult,l but different to some extend.

write in place (FAT32)

Most file systems did write "in place". This means that some data or metadata will be written "over" the previous data at the same place.

For example this is the case for FAT32 file systems. The File Allocation Table is at a fixed place on this file system. When the "FAT" changes (because a file got bigger and needs more blocks), this new FAT must be written with the new data to the same place as bevor. When the disk is ejected bevor(or while) this data is written, the file system will be corrupted. And the FAT does change a lot.

The danger of corruption is especially big while metadata (like filename, permission, usage of disk space ...) is being written.

write to a metadata-log (Ext4)

There is a solution to this with newer file systems like Ext4. Instead of writing metadata "in place", metadata is written into an "endless" log. Then it is not possible to be corrupted while overwritten. This is possible because metadata is only a very small part of the data in a file system.

There has to be an additional mechanism to make this safe. Sometimes this is called "barriers", and there have to be checksums that tell when a part of the log is corrupted.

This does protect the file system itself, but not the files in it. Because a file may be overwritten in place, and then the old file is lost, and the new one may not have been written completely.

copy on write! (btrfs)

Copy on write is a "new" concept. This means the file system will try to never write over existing data. How is this possible?

  • Files are appended at the end of a "data page"
  • Metadata is appended at a "metadata page"
  • Inside a page nothing is ever overwritten
  • When a page is full the file system will use the next free page
  • Deleting a file does not write/clean its data, but writes metadata, that marks this file as deleted
  • Overwriting a file does first append the new file to the "data page", then writes the metadata for this file
  • there are checksums for data and metadata


  • management of space is complex
  • there are 2 sorts of pages
  • there has to be a clean-up-process who makes the space of deleted files reusable, so that the disk does not run out of free pages
  • it must be avoided to write data unnecessarily, because then the clean-up would also be very expensive


  • it is possible to detect nearly any corruption because of the checksums
    • when the power is lost, or the disk is disconnected, all old data is save. WHY?
    • every bit of "old" data from before the power loss or the disconnection is present because it is NOT overwritten
    • only the newly written data may be partly damaged
    • the metadata may also be partly damaged
    • when mounting the volume it is possible by analysing checksums and metadata to find the point in the file system where all was good
    • btrfs will automatically roll back to this point, then it can mount the file system writeable
  • CoW is a sound foundation to build upon
    • snapshots
    • RAID
    • volume management
    • compression
    • encryption (maybe some time in the future)

user $ example command should be here COPY TO CLIPBOARD

Example codes should be here.

Please be aware that the information on this page is a simplified version of the reality. Is is written to make the reader understand a little of these complex things. To get an in depth understanding it will be neccesary to read further at or other places.

See Also

Example Link Title example text

Cookies help us deliver our services. By using our services, you agree to our use of cookies.