Manjaro-ARM

From Manjaro
Revision as of 23:39, 19 November 2020 by Cscs (talk | contribs) (update manjaro-arm)
Jump to navigation Jump to search


Overview

The Manjaro distribution, but for ARM devices.

Based on Arch Linux ARM, combined with Manjaro tools, themes and infrastructure to make install images for your ARM device, like the Pinebook and Raspberry Pi.


Supported Devices

Manufacturer Model
Khadas Edge-V Pro, Vim 1, Vim 2, Vim 3
Pine Pinebook, Pinebook Pro, Pinephone, Pinetab
Raspberry Pi 3B, Pi 3B+, Pi 4B, Pi 400
Rock Pi 4B, Pro 64


Raspberry Pi

Sensors

For temperature and humidity sensor see this tutorial on the forums: https://forum.manjaro.org/t/howto-raspberry-pi-temperature-and-humidity-sensor-dht22-dht11-am2302/34685


Overclocking

You can manage voltage and frequency settings in your /boot/config.txt. The following are the most common values for the Raspberry Pi:

 over_voltage=6
 arm_freq=2100
 gpu_freq=650


Pi 3B

Blocked update workaround
sudo systemctl disable brcm43438.service
sudo pacman -S -dd  brcm-patchram-plus-pi3b firmware-raspberrypi
sudo systemctl enable attach-bluetooth-pi3.service


Pi 3B+

Blocked update workaround
sudo systemctl disable brcm43438.service
sudo pacman -S -dd  brcm-patchram-plus firmware-raspberrypi
sudo systemctl enable attach-bluetooth.service


Pi 4B

Blocked update workaround
sudo systemctl disable brcm43438.service
sudo pacman -S -dd  brcm-patchram-plus firmware-raspberrypi
sudo systemctl enable attach-bluetooth.service


Pi 400

Blocked update workaround
sudo systemctl disable brcm43438.service
sudo pacman -S -dd  brcm-patchram-plus-pi400 firmware-raspberrypi
sudo systemctl enable attach-bluetooth-pi400.service


Pinebook

Tips and Tricks

See also

https://wiki.archlinux.org/index.php/Category:ARM_architecture
https://archlinuxarm.org/wiki
https://osdn.net/projects/manjaro-arm/