Manjaro Difference between pages "Manjaro Forums" and "GRUB/Restore the GRUB Bootloader"

Difference between pages "Manjaro Forums" and "GRUB/Restore the GRUB Bootloader"

From Manjaro
(Difference between pages)
imported>Stonski
(Undo revision 5971 by Stonski (talk))
 
imported>Verityproductions
 
Line 1: Line 1:
<div style="float: left; width: 50%">
= Overview =
{|
[[File:forum.jpg|left|96px]]
|
* [http://forum.manjaro.org/index.php The Official Manjaro Forum]
:  ''Read and participate in our active forum - everybody's welcome! ''


As with any Linux operating system, the GRUB ('''GR'''and '''U'''nified '''B'''ootloader) is responsible for booting up Manjaro. If for any reason your GRUB is not working - perhaps due to being corrupted, mis-configured, or even deleted - then it may not be necessary to reinstall Manjaro. '''The GRUB can instead be fully repaired and restored, retaining your installed Manjaro system'''.


* [http://www.manjaro.fr/forum The French Manjaro Forum]
:  ''Forum francophone. ''
|}
</div>


<div style="float: right; width: 50%">
= Boot the Manjaro Installation Media =
* [http://www.manjaro-linux.com.br/forum/portal.php The Brazilian Manjaro Forum]
:  ''Um fórum comunitário em português. ''


'''1.''' Insert and boot your Manjaro installation media (e.g. CD/DVD or USB).


* [http://manjaro-tr.org/forum/index.php The Turkish Manjaro Forum]  
'''2.''' Select your '''preferred language''' (F2) and '''keyboard layout''' (F3).
:  ''Türk kullanıcılar için topluluk forumu. ''
 
</div>
{{tip|Setting the language and keyboard layout are undertaken by pressing the ''Function'' (F) keys. As many computers have multiple functions assigned to each function key, it may be necessary to hold down another key first to use them. For example, on a HP G62 laptop, to use the function keys, the 'fn' key must first be pressed and held.}}
<div style="clear: both"></div>
 
 
'''3.''' Boot Manjaro Linux. It does not matter which boot option you choose, as the installation media is being used solely to repair/reinstate the GRUB, and not to install a fresh system.
 
'''4.''' Open the terminal or access the command line of the live CD.
 
* '''From the desktop environment''': open the terminal from your desktop menu, or
* '''From the command line''' (e.g. NET-Edition or having used the ''Boot in Text mode'' option): enter the default username (manjaro) and password (manjaro) to log in.
 
 
= Identify and Prepare the Installed Partition(s) =
 
'''1.''' Ensure that you are using the Root account, which is identified by a hash ('#') at the beginning of the command line, rather than a dollar ('$'). To switch to Root, enter the command:
 
sudo su
 
{{tip|The password - if requested - will be ''manjaro''}}
 
 
'''2.''' List your partitions. This is necessary in order to identify the partition your Manjaro system is installed on. If you have used a separate boot partition, it will be necessary to identify this as well. For a list of your paritions, enter the command:
 
sudo blkid
 
 
In this particular instance, the partitions for the author's Manjaro system are as follows:
 
* '''/dev/sda1''': Boot partition
* '''/dev/sda2''': Swap partition
* '''/dev/sda3''': Manjaro system
* '''/dev/sda4''': Space for personal files.
 
{{tip|You can also use an application called '''gparted''' from the desktop menu to look at your partitions. This can help you identify what they are, if you are unsure. For example, if a seperate partition for the GRUB exists, it should only be about 100MB in size.}}
 
 
'''3.''' Mount your Manjaro system partition. The syntax to mount the Manjaro system partition is:
 
mount /dev/'''[partition used for Manjaro system]''' /mnt
 
 
In this instance, as the Manjaro system partition is ''/dev/sda3'', this will be mounted using the following command:
 
  mount /dev/'''sda3''' /mnt
 
 
'''IF''' you have used a seperate partition for your GRUB bootloader, then this must also be mounted. The syntax to mount a separate partition used to boot is:
 
mount /dev/'''[partition used for GRUB]''' /mnt/boot
 
 
In this instance, a seperate partition - ''/dev/sda1'' - has been used for the GRUB, and will be mounted using the following command:
 
mount /dev/'''sda1''' /mnt/boot
 
{{note|Again, if you have not used a seperate boot partition, then it (obviously) does not need to be mounted!}}
 
 
'''3.''' Change to the root directory of your mounted partitions. This is undertaken so that you are working from  - and with - your installed system, rather than the installation media. To do so, it will be necessary to enter a series of commands in the following order:
 
mount -t proc proc /mnt/proc
mount -t sysfs sys /mnt/sys
mount -o bind /dev /mnt/dev
mount -t devpts pts /mnt/dev/pts/
chroot /mnt
 
 
'''4.''' Install the software applications ''mtools'' and ''os-prober''. mtools is a collection of tools to access Microsoft Operating Systems. os-prober is a utility that detects if there are any other operating systems present. Install them with the following command:
 
pacman -S mtools os-prober
 
 
= Restore the GRUB =
 
'''1.''' Install a new GRUB bootloader
 
grub-install /dev/sda
 
 
'''2.''' Recheck to ensure the that installation has completed without any errors.
 
grub-install --recheck /dev/sda
 
 
'''3.''' Configure the freshly installed GRUB bootloader
 
grub-mkconfig -o /boot/grub/grub.cfg
 
 
Once complete, close the terminal and reboot your system.
 
 
[[Category:Troubleshooting]]
[[Category:Contents Page]]

Revision as of 21:27, 16 October 2012

Overview

As with any Linux operating system, the GRUB (GRand Unified Bootloader) is responsible for booting up Manjaro. If for any reason your GRUB is not working - perhaps due to being corrupted, mis-configured, or even deleted - then it may not be necessary to reinstall Manjaro. The GRUB can instead be fully repaired and restored, retaining your installed Manjaro system.


Boot the Manjaro Installation Media

1. Insert and boot your Manjaro installation media (e.g. CD/DVD or USB).

2. Select your preferred language (F2) and keyboard layout (F3).



Tip
Setting the language and keyboard layout are undertaken by pressing the Function (F) keys. As many computers have multiple functions assigned to each function key, it may be necessary to hold down another key first to use them. For example, on a HP G62 laptop, to use the function keys, the 'fn' key must first be pressed and held.


3. Boot Manjaro Linux. It does not matter which boot option you choose, as the installation media is being used solely to repair/reinstate the GRUB, and not to install a fresh system.

4. Open the terminal or access the command line of the live CD.

  • From the desktop environment: open the terminal from your desktop menu, or
  • From the command line (e.g. NET-Edition or having used the Boot in Text mode option): enter the default username (manjaro) and password (manjaro) to log in.


Identify and Prepare the Installed Partition(s)

1. Ensure that you are using the Root account, which is identified by a hash ('#') at the beginning of the command line, rather than a dollar ('$'). To switch to Root, enter the command:

sudo su



Tip
The password - if requested - will be manjaro


2. List your partitions. This is necessary in order to identify the partition your Manjaro system is installed on. If you have used a separate boot partition, it will be necessary to identify this as well. For a list of your paritions, enter the command:

sudo blkid


In this particular instance, the partitions for the author's Manjaro system are as follows:

  • /dev/sda1: Boot partition
  • /dev/sda2: Swap partition
  • /dev/sda3: Manjaro system
  • /dev/sda4: Space for personal files.



Tip
You can also use an application called gparted from the desktop menu to look at your partitions. This can help you identify what they are, if you are unsure. For example, if a seperate partition for the GRUB exists, it should only be about 100MB in size.


3. Mount your Manjaro system partition. The syntax to mount the Manjaro system partition is:

mount /dev/[partition used for Manjaro system] /mnt


In this instance, as the Manjaro system partition is /dev/sda3, this will be mounted using the following command:

mount /dev/sda3 /mnt


IF you have used a seperate partition for your GRUB bootloader, then this must also be mounted. The syntax to mount a separate partition used to boot is:

mount /dev/[partition used for GRUB] /mnt/boot


In this instance, a seperate partition - /dev/sda1 - has been used for the GRUB, and will be mounted using the following command:

mount /dev/sda1 /mnt/boot


Note
Again, if you have not used a seperate boot partition, then it (obviously) does not need to be mounted!


3. Change to the root directory of your mounted partitions. This is undertaken so that you are working from - and with - your installed system, rather than the installation media. To do so, it will be necessary to enter a series of commands in the following order:

mount -t proc proc /mnt/proc
mount -t sysfs sys /mnt/sys
mount -o bind /dev /mnt/dev
mount -t devpts pts /mnt/dev/pts/
chroot /mnt


4. Install the software applications mtools and os-prober. mtools is a collection of tools to access Microsoft Operating Systems. os-prober is a utility that detects if there are any other operating systems present. Install them with the following command:

pacman -S mtools os-prober


Restore the GRUB

1. Install a new GRUB bootloader

grub-install /dev/sda


2. Recheck to ensure the that installation has completed without any errors.

grub-install --recheck /dev/sda


3. Configure the freshly installed GRUB bootloader

grub-mkconfig -o /boot/grub/grub.cfg


Once complete, close the terminal and reboot your system.

Cookies help us deliver our services. By using our services, you agree to our use of cookies.