Difference between revisions of "Power Management"
imported>Verityproductions |
imported>Verityproductions |
||
| Line 2: | Line 2: | ||
Power Saving Techniques can be used on Laptops to maximize the Battery Life and minimize the heat produced, and conserve energy. | Power Saving Techniques can be used on Laptops to maximize the Battery Life and minimize the heat produced, and conserve energy. | ||
= Power Saving using TLP = | |||
TLP can be used for automatic power management, as explained in the following quote from their website: | TLP can be used for automatic power management, as explained in the following quote from their website: | ||
| Line 15: | Line 15: | ||
== How to Install TLP == | == How to Install TLP == | ||
TLP is | {{warning|TLP can conflict with laptop-mode-tools, so if you have laptop-mode-tools installed and want to install TLP, then uninstall laptop-mode-tools first!}} | ||
TLP is available form the '''[[Arch User Repository]''', and where access has been enabled, can be installed by entering the following command into your terminal: | |||
yaourt -S tlp | yaourt -S tlp | ||
After | |||
After installation, TLP then needs to be configured to be run automatcially when you start up your computer. To do so, enter the following commands into your terminal: | |||
systemctl enable tlp | systemctl enable tlp | ||
systemctl enable tlp-sleep.service | systemctl enable tlp-sleep.service | ||
Now TLP will automatically start every time you boot your computer. | |||
= An Alternative to TLP for Laptop Users = | |||
{{warning|Again, TLP and laptop-mode-tools '''must not''' be installed together!}} | |||
From the Arch Wiki | From the Arch Wiki: | ||
<blockquote>Laptop Mode Tools is a laptop power saving package for Linux systems. It is the primary way to enable the Laptop Mode feature of the Linux kernel, which lets your hard drive spin down. In addition, it allows you to tweak a number of other power-related settings using a simple configuration file.</blockquote> | <blockquote>'Laptop Mode Tools is a laptop power saving package for Linux systems. It is the primary way to enable the Laptop Mode feature of the Linux kernel, which lets your hard drive spin down. In addition, it allows you to tweak a number of other power-related settings using a simple configuration file.'</blockquote> | ||
To install laptop-mode-tools | |||
To install '''laptop-mode-tools''', enter the following command into your terminal: | |||
sudo pacman -S laptop-mode-tools | sudo pacman -S laptop-mode-tools | ||
Once installed, to enable ''laptop-mode-tools'' to start automatically every time you boot your computer, enter the following into your terminal: | |||
sudo systemctl enable laptop-mode.service | sudo systemctl enable laptop-mode.service | ||
''Laptop-mode-tools'' will automatically configures some settings for you in order to optimise your laptop's battery life. | |||
= Manually Setting Laptop-Mode-Tools Configuration = | |||
For user configuration, the file to edit is '''/etc/laptop-mode/laptop-mode.conf''' (primary configuration file) | |||
The individual kernel modules can be configured from the configuration files present in '''/etc/laptop-mode/conf.d/''' | |||
Revision as of 19:07, 6 November 2013
Power Saving Techniques can be used on Laptops to maximize the Battery Life and minimize the heat produced, and conserve energy.
Power Saving using TLP
TLP can be used for automatic power management, as explained in the following quote from their website:
'TLP brings you the benefits of advanced power management for Linux without the need to understand every technical detail. TLP comes with a default configuration already optimized for battery life, so you may just install and forget it. Nevertheless TLP is highly customizable to fulfil your specific requirements.
All TLP settings are stored in the config file /etc/default/tlp. As the default configuration already provides for optimized battery saving, in many cases there is no immediate need to change it.
TLP is a pure command line tool with automated background tasks. It does not contain a GUI.'
How to Install TLP
TLP is available form the [[Arch User Repository], and where access has been enabled, can be installed by entering the following command into your terminal:
yaourt -S tlp
After installation, TLP then needs to be configured to be run automatcially when you start up your computer. To do so, enter the following commands into your terminal:
systemctl enable tlp systemctl enable tlp-sleep.service
Now TLP will automatically start every time you boot your computer.
An Alternative to TLP for Laptop Users
From the Arch Wiki:
'Laptop Mode Tools is a laptop power saving package for Linux systems. It is the primary way to enable the Laptop Mode feature of the Linux kernel, which lets your hard drive spin down. In addition, it allows you to tweak a number of other power-related settings using a simple configuration file.'
To install laptop-mode-tools, enter the following command into your terminal:
sudo pacman -S laptop-mode-tools
Once installed, to enable laptop-mode-tools to start automatically every time you boot your computer, enter the following into your terminal:
sudo systemctl enable laptop-mode.service
Laptop-mode-tools will automatically configures some settings for you in order to optimise your laptop's battery life.
Manually Setting Laptop-Mode-Tools Configuration
For user configuration, the file to edit is /etc/laptop-mode/laptop-mode.conf (primary configuration file)
The individual kernel modules can be configured from the configuration files present in /etc/laptop-mode/conf.d/
Minimizing Laptop/Desktop temperatures
For Intel Machines
The intel pstate driver automatically handles CPU frequency scaling according to system load.
Note that the Intel Pstate works only with kernels >= 3.9, and kernel 3.11 is recommended.
Supported processor families are Intel Sandy Bridge, Ivy Leage and up.
The Intel Thermal Daemon (thermald) can be installed to automatically manage the CPU Temperature.
Install it with
yaourt -S thermald
After installing it needs to be configured to automatically start at boot:
sudo systemctl enable thermald
For AMD Machines
With Linux Kernel 3.11, AMD introduced Dyanamic Power Management (DPM) for the GPU for the free drivers, which can lead to lower power consumption and better operating temperatures.
To enable it,
sudo gedit /etc/default/grub
add/change the line
GRUB_CMDLINE_LINUX="" to GRUB_CMDLINE_LINUX="radeon.dpm=1"
and generate grub.cfg
grub-mkconfig -o /boot/grub/grub.cfg
PowerTOP
PowerTop a diagnostic tool used to identify and report issues with power consumption and management. It can be used to check the power consumption.
Install it with-
sudo pacman -S powertop
Run PowerTop to analyze power consumption
sudo powertop
To save PowerTops output to a file,
sudo powertop --html
For more details, see Powertop : Manjaro Wiki
Support
Following is a link to this page's forum counterpart where you can post any related feedback: [1]
Credit goes to LiberteCzech for posting about TLP, and to Arup for posting about Thermald, and to the Arch Wiki for their documentation, especially on Laptop-Mode-Tools
For some more configuration, see FadeMind's forum tutuorial here