Difference between revisions of "Translations:Btrfs/60/en"

Revision as of 08:10, 2 June 2023

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Btrfs)

=== Filters ===
Because a complete balance may take '''a long time''', there is the possibility of filters in balance. When using a filter only those chunks will be balanced, that are named by the filter.
* '''balance''' all chunks that are less than 50% full. This '''will''' take some time !
{{RootCmd|command=btrfs balance start -musage=50 -dusage=50 /}}
* '''balance''' all chunks that are less than 90% full. This '''will''' take some time !
{{RootCmd|command=btrfs balance start -musage=90 -dusage=90 /}}
{{BoxWarning|Don't use filters higher than 90%|This is unnecessary on an SSD drive. On a hard drive, this will put a lot of strain on the disk. Even with today's hard drives (>2TB), it may take a very long time. (e.g. 24 hours or more)}}

=== Filters ===
Because a complete balance may take '''a long time''', there is the possibility of filters in balance. When using a filter only those chunks will be balanced, that are named by the filter.
* '''balance''' all chunks that are less than 50% full. This '''will''' take some time !
{{RootCmd|command=btrfs balance start -musage=50 -dusage=50 /}}
* '''balance''' all chunks that are less than 90% full. This '''will''' take some time !
{{RootCmd|command=btrfs balance start -musage=90 -dusage=90 /}}
{{BoxWarning|Don't use filters higher than 90%|This is unnecessary on an SSD drive. On a hard drive, this will put a lot of strain on the disk. Even with today's hard drives (>2TB), it may take a very long time. (e.g. 24 hours or more)}}

Filters

Because a complete balance may take a long time, there is the possibility of filters in balance. When using a filter only those chunks will be balanced, that are named by the filter.

Potetial Bug when using a swapfile:

Never use a full-balance on a machine with a swapfile, since it will ignore +C Attributes. You may also have a look at [1]