Обзор
Печать осуществляется с помощью CUPS (ранее это было сокращение от Common Unix Printing System). Это популярная система печати с открытым исходным кодом, используемая в большинстве дистрибутивов Linux благодаря простоте использования.
Установка программного обеспечения принтера
Сначала установите пакет manjaro-printer с помощью вашего любимого менеджера пакетов или с помощью команды:
pamac install manjaro-printer
Обратите внимание, что Вам может понадобиться добавить себя в группу sys. Для этого используйте команду:
sudo gpasswd -a yourusername sys
Включение возможностей печати
После установки необходимого программного обеспечения для запуска и включения возможности печати введите следующие команды:
sudo systemctl enable --now cups.service sudo systemctl enable --now cups.socket sudo systemctl enable --now cups.path
Если необходимо простое обнаружение сетевых принтеров (не во всех редакциях установлен и работает avahi), можно установить и запустить следующую службу:
pamac install avahi sudo systemctl enable --now avahi-daemon.service
На этом этапе вы должны быть готовы к настройке принтера
Управление принтерами
Управление принтерами с помощью HP Device Manager
Если у вас есть принтер производства HP - проще всего управлять им с помощью диспетчера устройств HP (hp-toolbox). Он основан на мастере подключения и обеспечивает автоматическое обнаружение и настройку принтера локально или по сети.
Его можно запустить, выбрав HP Device Manager в меню или командой hp-toolbox.
Управление принтерами через CUPS
Another way to add a printer is to use CUPS directly. Assuming CUPS has been enabled (and started), upon connecting a printer, it should be automatically detected and configured for you to use. The process itself should take only about a minute. However, if the automatic detection and configuration doesn't seem to work, then your printer can be manually set up with relative ease. There are two methods to do so:
- Webpage Interface: CUPS provides an webpage interface that will open in your default web browser to configure your printer. This interface also provides access to further information about CUPS, as well as on-line help.
- Desktop Interface: A standard desktop wizard is also available, which should be instantly familiar to those who have configured a printer before, whether using Linux or another operating system such as windows. Note that you may need to install your DE's printer config package using your favorite package manager or by using one of the following commands.
GNOME:
pamac install system-config-printer.
KDE:
pamac install print-manager
CUPS Webpage Interface
To access the webpage interface, select Manage Printing from your desktop menu. The interface will automatically open in your default web browser. Alternatively, you can also open your choice of web browser, and enter the following into the address bar:
CUPS Desktop Interface Part 1: The Automatic Method
1. Add your printer. Ensuring that your printer is properly connected and switched on, select Print Settings from your desktop menu. Once the Print Settings window has opened, click + add to add a new printer.
2. Select your printer name. Once the New Printer window has opened, under the Select Device heading, find the name of your printer and click to highlight it. If your printer is listed more than once, check the description on the right to ensure your selection is not for another function, such as scanning or faxing.
3. Select your printer connection. Under the Connection heading, click to highlight your printer's connection method. As illustrated, this will usually always be 'USB'.
4. Install your printer driver. Once your printer name and connection have been highlighted, click the Forward button and CUPS will automatically search for the available drivers for it. In most instances, once the appropriate driver has been found it will be automatically installed, and the set-up process will have completed.
Otherwise, if the process did not succeed, it will be necessary to click the forward button again in order chose the appropriate driver yourself.
CUPS Desktop Interface Part 2: The Manual Method
1. Select your printer make. If the Automatic method did not automatically find and install an appropriate driver for your printer, then clicking the forward button again will present the Chose Driver window. The first step is to select the make of your printer. As illustrated, as an HP printer is to be installed, the recommended choice of HP has been highlighted by clicking on it.
Once your make of printer has been highlighted, click the forward button to proceed to the next step.
2. Select your printer model. Under the left-heading models, select the specific model of your printer. As illustrated, as the printer model to be installed in this instance is a Model 2210, the recommended choice of PSC 2210 has been highlighted by clicking on it.
3. Select your printer driver. At last! Under the right-heading Drivers, select the appropriate driver for your printer. As illustrated, the recommended printer driver has been clicked to highlight it. It is advised that you also select whatever driver is recommended for you.
Once your printer model and driver have been highlighted, click the forward button to proceed to the next step.
4. Choose your printer name, description (optional), and location (optional). Unless you want to change something, it will not be necessary to make any amendments here.
If you are happy with the information provided - or have made the desired changes - click the Apply button to complete the process.
5. Configure your printer. Having clicked the Apply button in the previous step, your printer's properties will be displayed. By selecting the categories on the right-hand side, you can view information and amend your printer's settings if you wish. The standard settings will be fine for most people, so unless you have something specific in mind, there will be nothing you need to do.
6. Test your printer. Although optional, this step is highly recommended! Click the Print Test Page button to ensure that your printer is set up and working properly.
That's it! Now click the OK button to close the window and start using your printer.
Modifying an Installed Printer
To configure an installed printer at any time:
1. select the Print Settings option from your desktop menu, and
2. double-click the printer's icon.
The configuration window will appear. Select any of the categories on the left-hand side of the window to view the appropriate information and make any desired changes. Once complete, click the Apply and then OK buttons to confirm and save your changes, or click the Cancel button to close the window without making any changes.
Removing an Installed Printer
If for any reason you wish to remove a printer (e.g. to reinstall it), select the Print Settings option from your menu, right-click your printer's icon, and then select delete. You will need to confirm your decision to delete the printer, as well as enter your password to complete the task.
Disabling Printing Capabilities
If for any reason you wish to disable CUPS (e.g. in order to use an alternative printing system), open your terminal and enter the following command:
sudo systemctl disable --now cups.service sudo systemctl disable --now cups.socket sudo systemctl disable --now cups.path
Specific printers/scanners that are known to work
| Brand | Type | Scan | Description how to set up | Issues & Solutions | More info | ||
|---|---|---|---|---|---|---|---|
| Canon | mp 280 | Yes, via network | Yes, only local | CUPS and manjaro-printer | Remote scanning | ||
| Canon | Pixma MX535 | Yes, via network | Yes, via network | Manjaro printer detects remote printer as mx530. scanner needs scangearmp2-sane-git to function properly | Needs avahi and in my case ipv6 for some reason to be able to 'see' the printer (@hanzel on the forum) | ||
| Canon | PIXMA TR4522 | Needs: cnijfilter2 or cnijfilter2-bin from the AUR | forum post | ||||
| Canon | PIXMA TS5120 | Yes | Yes | Scanner seems to work after CUPS and manjaro-printer, printing requires cnijfilter and selecting Canon TS5100 series drivers | Needs: cnijfilter2 or cnijfilter2-bin from the AUR | ||
| Epson | WF-3825 driver | Needs: epson-inkjet-printer-escpr2 AUR | Forum post | ||||
| Canon | Pixma Pro-100 | Yes, via network and local | Not a feature | manjaro-printer | Takes a moment to start printing, just be patient | ||
| Canon | ISensys | LBP223dw | Yes | forum post | |||
| Canon | Pixma E4270 | Yes via Network | not tested | Needs: cnijfilter2 or cnijfilter2-bin from the AUR | forum post | ||
| Canon | Pixma G2100 | Yes | Yes | Plug& play | forum post | ||
| Epson | ET-M1120 | Yes, via Network | Not a feature | manjaro-printer and system-config-printer | Needs: epson-inkjet-printer-escpr and epson-inkjet-printer-escpr2 in AUR and then patch from pacman | External link |
Table made from suggestion here