Manjaro GRUB/Restore the GRUB Bootloader

GRUB/Restore the GRUB Bootloader

From Manjaro
This page contains changes which are not marked for translation.
Other languages:
Deutsch • ‎English • ‎Türkçe • ‎français • ‎русский


In order to load the operating system, a Linux-capable boot loader such as GRUB, rEFInd or Syslinux needs to be installed to the Master Boot Record (MBR) or the GUID Partition Table (GPT) of the media containing the Operating System. Installations created using Manjaro ISO defaults to GRUB.

For various reasons - it happens the bootloader get's corrupted, erased or misconfigured resulting to a black screen with a failure message during boot, like No boot loaders found in /dev/.... To restore system operation without re-installing your OS or losing your data you will need to use your Manjaro installation media, such as, a CD/DVD or USB Flashdrive.

Archlinux Boot Process
More information about the boot process on Archlinux based distributions is available at Archwiki


Identify the type of system you are attempted to resque as the commands involved are slightly different.

  • BIOS/MBR/GPT system
  • EFI/GPT system

Load Manjaro Installation Media

System Boot Override
To override system boot order the vendor has a dedicated key. Most laptop keyboard has multiple use for the function keys and the primary function may be reversed. In such case a Fn key must be used with the function key. If you don't know consult your system documentation. Manjaro ISO default usernames and passwords
Default UsernameDefault Password

Identify partitions

To identify your partitions and their designated use you need to run a partition manager. Depending on environment there is various tools. GTK based ISO offers GpartEd, QT based ISO offers KParted and common to all is the CLI tools.


More comprehensive information can be found using fdisk (requires superuser) and you can limit the probed device e.g. /dev/sda or /dev/nvme0n1

user $ sudo fdisk -l /dev/sda COPY TO CLIPBOARD

The clues to look for is mbr vs. gpt and the presence of a small partition - usually the first - formatted with the vfat filesystem followed by a larger partition formatted as ext4.

This document and the content should never be used as a copy/paste resource. The remainder of this document will use pseudo names and partition numbering. Devices will be referred as /dev/sdy and partitions referred as /dev/sdyA and you will have to subtitute those with the real values from your system.

Use root context

When you have loaded the live ISO - depending on environment - open a terminal and switch to root context. Use above mentioned root:password combination.


Chroot environment

Chroot is a method to restrict various tasks to a restricted area e.g. package installation and other system maintenance tasks. Follow the link to read more about chroot on the Arch wiki.

Identify system partitions

From the above we assume you have identified the relevant partitions on your system and this document will refer the partitions as follows. Partitions not needed for this kind of maintenance has intentionally been left out (e.g. home, swap).

Partition Usage Comment
/dev/sdyA EFI system Required for EFI system and mounted on /boot/efi
/dev/sdyB boot Optional but mounted on /boot The primary use is when GRUB cannot write to / (eg. f2fs)
/dev/sdyC root Required and for the root filesystem and mounted on / - usually formatted using ext4
If your system is a BIOS/MBR system there is no efi partition. If your system is a BIOS/GPT system you will find an unformatted partion size 1-32MB of the bios boot partition type.

Use manjaro-chroot

Manjaro deploys a script called manjaro-chroot takes an optional argument which will search the visible devices - scan the partitions for signs of an operating system. If more than one Linux operating system is found you will get a choice of which system to chroot otherwise the file /etc/fstab from the system is used to mount the partitions and chroot into this system.This script is only available in live iso by default but you can get it in an installed system by installing manjaro-tools-base package.

root # pamac install manjaro-tools-base COPY TO CLIPBOARD

root # manjaro-chroot -a COPY TO CLIPBOARD

Manual chroot

(Unnecessary if you have used manjaro-chroot) Mount the partitions using the designated temporary mountpoint and always start with root

root # mount /dev/sdyC /mnt COPY TO CLIPBOARD

With a BTRFS filesystem, you should note that the subvolumes must be mounted. That would be in such a case:
root # mount -o subvol=@ /dev/sdyC /mnt COPY TO CLIPBOARD

Then - if applicable - mount boot

root # mount /dev/sdyB /mnt/boot COPY TO CLIPBOARD

Then - if applicable - mount efi

root # mount /dev/sdyA /mnt/boot/efi COPY TO CLIPBOARD

Create the chroot environment and use bash as shell

root # manjaro-chroot /mnt /bin/bash COPY TO CLIPBOARD

Reinstall GRUB

One possible cause why you are reading this document - is an unfinished update - which in turn can be caused by several situations - situation we will not dive into. To fix what ever caused this you should run a full system update including grub to ensure everything is in place.

root # pacman -Syu grub COPY TO CLIPBOARD

When the transaction as completed continue below using the section matching your system

BIOS System

On a BIOS/GPT system there is no MBR and therefore no place to store the loader. The GPT partition specification allows for an unformatted partition of the BIOS boot partition type (0xEF02). The size of this partition can be as small as 1 mebibyte. The Calamares installer uses a fixed size of 32 mebibyte. On a BIOS/MBR system a part of the bootloader is written to the Master Boot Record for the primary disk.

The device is the disk (not a partition)

root # grub-install --force --target=i386-pc --recheck --boot-directory=/boot /dev/sdy COPY TO CLIPBOARD

Make sure the grub configuration is up-to-date

root # grub-mkconfig -o /boot/grub/grub.cfg COPY TO CLIPBOARD

EFI System

You need to be in chroot for this procedure.

Reinstall grub

root # grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=manjaro --recheck COPY TO CLIPBOARD

Update the grub configuration

root # grub-mkconfig -o /boot/grub/grub.cfg COPY TO CLIPBOARD

EFI grub install messages
EFI variables are not supported on this system.

Verify the existance of an EFI system partition


Verify the efi filesystem is loaded

root # ls /sys/firmware/efi COPY TO CLIPBOARD

Exit chroot


Try loading the efi filesystem

root # modprobe efivarfs COPY TO CLIPBOARD

Re-enter chroot

root # manjaro-chroot /mnt /bin/bash COPY TO CLIPBOARD

Then mount the efi filesystem

root # mount -t efivarfs efivarfs /sys/firmware/efi/efivars COPY TO CLIPBOARD

Verify the efi filesystem is loaded

root # ls /sys/firmware/efi COPY TO CLIPBOARD

If successfull re-run above installation commands

Updating grub

Sometimes there is an update for the GRUB package itself. So far, the grub package is updated, but the new GRUB Version is not automatically installed in the boot area.

You can do this manually following the instructions above. Or you can install the Grub Maintainer Script install-grub. It should work flawless for the majority of people, but SecureBoot, ZFS and fancy encryptions are not supported yet.

root # pacman -Syu install-grub COPY TO CLIPBOARD

Then once run

root # install-grub COPY TO CLIPBOARD

The package includes a hook that will reinstall the bootloader when needed from now on at every update of grub.

Additional Information

Some things around grub can be confusing.

package version of grub

Its the version of the grub-package present in your filesystem. But this version changing does not update the installed grub-bootloader.

grub-bootloader version

This can only been shown while you are in the Grub menu (that won’t show up while booting by default, you need to hit [shift] during boot). Hit the key [E] and your will see the Grub version on top.


Does not update the installed bootloader. The ‘update’ is more about updating configuration. Think of this more as ‘applying settings’. (~ equal to grub-mkconfig -o /boot/grub/grub.cfg)


is the script (background maintainer) that does update the installed bootloader when you download a Stable Release/Unstable Release Version, which included a new Grub Version.


Manjaro is not recognized

If Manjaro wasn't recognized after an update-grub then probably your Manjaro installation is missing the package lsb-release.

See also

Cookies help us deliver our services. By using our services, you agree to our use of cookies.