Difference between revisions of "Manjaro-ARM"

Line 23:

# Go to the [https://github.com/Tow-Boot/Tow-Boot/releases latest release section] of Tow-Boot and download the file that matches your board. This is important.

#

# Unpack it and flash the `spi.~~imager~~.img` file to a spare SD card. If the archive does not contain any spi.~~imager~~.img file for your board, you should use one of our pre-built OS images instead, which has the Shared Storage version of U-boot installed.

# Unpack it and flash the `spi.installer.img` file to a spare SD card. If the archive does not contain any spi.installer.img file for your board, you should use one of our pre-built OS images instead, which has the Shared Storage version of U-boot installed.

#

# Insert the SD card into your device and boot from it. You will be presented with a short menu. One entry is "Flash Tow-Boot to SPI", second entry is "Erase SPI Flash" and the last option is "Reboot".

@@ Line 23: / Line 23: @@
 # Go to the [https://github.com/Tow-Boot/Tow-Boot/releases latest release section] of Tow-Boot and download the file that matches your board. This is important.
 #
-# Unpack it and flash the `spi.imager.img` file to a spare SD card. If the archive does not contain any spi.imager.img file for your board, you should use one of our pre-built OS images instead, which has the Shared Storage version of U-boot installed.
+# Unpack it and flash the `spi.installer.img` file to a spare SD card. If the archive does not contain any spi.installer.img file for your board, you should use one of our pre-built OS images instead, which has the Shared Storage version of U-boot installed.
 #
 # Insert the SD card into your device and boot from it. You will be presented with a short menu. One entry is "Flash Tow-Boot to SPI", second entry is "Erase SPI Flash" and the last option is "Reboot".