Manjaro Difference between revisions of "GRUB/Restore the GRUB Bootloader"

Difference between revisions of "GRUB/Restore the GRUB Bootloader"

From Manjaro
imported>Verityproductions
imported>Verityproductions
Line 41: Line 41:
* '''/dev/sda3''': Manjaro system
* '''/dev/sda3''': Manjaro system
* '''/dev/sda4''': Space for personal files.
* '''/dev/sda4''': Space for personal files.


{{tip|You can also use an application called '''gparted''' from the desktop menu to look at your partitions. This can help you identify what they are, if you are unsure. For example, if a seperate partition for the GRUB exists, it should only be about 100MB in size.}}
{{tip|You can also use an application called '''gparted''' from the desktop menu to look at your partitions. This can help you identify what they are, if you are unsure. For example, if a seperate partition for the GRUB exists, it should only be about 100MB in size.}}
Line 100: Line 99:


Once complete, close the terminal and reboot your system.
Once complete, close the terminal and reboot your system.
[[Category:Troubleshooting]]
[[Category:Contents]]

Revision as of 21:22, 16 October 2012

Overview

As with any Linux operating system, the GRUB (GRand Unified Bootloader) is responsible for booting up Manjaro. If for any reason your GRUB is not working - perhaps due to being corrupted, mis-configured, or even deleted - then it may not be necessary to reinstall Manjaro. The GRUB can instead be fully repaired and restored, retaining your installed Manjaro system.


Boot the Manjaro Installation Media

1. Insert and boot your Manjaro installation media (e.g. CD/DVD or USB).

2. Select your preferred language (F2) and keyboard layout (F3).



Tip
Setting the language and keyboard layout are undertaken by pressing the Function (F) keys. As many computers have multiple functions assigned to each function key, it may be necessary to hold down another key first to use them. For example, on a HP G62 laptop, to use the function keys, the 'fn' key must first be pressed and held.


3. Boot Manjaro Linux. It does not matter which boot option you choose, as the installation media is being used solely to repair/reinstate the GRUB, and not to install a fresh system.

4. Open the terminal or access the command line of the live CD.

  • From the desktop environment: open the terminal from your desktop menu, or
  • From the command line (e.g. NET-Edition or having used the 'Boot in Text mode' option: enter the default username (manjaro) and password (manjaro) to log in.


Identify and Prepare the Installed Partition(s)

1. Ensure that you are using the Root account, which is identified by a hash ('#') at the beginning of the command line, rather than a dollar ('$'). To switch to Root, enter the command:

sudo su



Tip
The password - if requested - will be manjaro


2. List your partitions. This is necessary in order to identify the partition your Manjaro system is installed on. If you have used a separate boot partition, it will be necessary to identify this as well. For a list of your paritions, enter the command:

sudo blkid


In this particular instance, the partitions for the author's Manjaro system are as follows:

  • /dev/sda1: Boot partition
  • /dev/sda2: Swap partition
  • /dev/sda3: Manjaro system
  • /dev/sda4: Space for personal files.



Tip
You can also use an application called gparted from the desktop menu to look at your partitions. This can help you identify what they are, if you are unsure. For example, if a seperate partition for the GRUB exists, it should only be about 100MB in size.


3. Mount your Manjaro system partition. The syntax to mount the Manjaro system partition is:

mount /dev/[partition used for Manjaro system] /mnt


In this instance, as the Manjaro system partition is /dev/sda3, this will be mounted using the following command:

mount /dev/sda3 /mnt


IF you have used a seperate partition for your GRUB bootloader, then this must also be mounted. The syntax to mount a separate partition used to boot is:

mount /dev/[partition used for GRUB] /mnt/boot


In this instance, a seperate partition - /dev/sda1 - has been used for the GRUB, and will be mounted using the following command:

mount /dev/sda1 /mnt/boot


Note
Again, if you do have not used a seperate boot partition, then it (obviously) does not need to be mounted! If you are not sure, then check the size of the partitions: a seperate partition used just for the GRUB should be the recommended size of 100MB.


3. Change to the root directory of your mounted partitions (i.e. so you are working from and using your installed system, rather than the live CD). To do so, it will be necessary to enter a series of command:

mount -t proc proc /mnt/proc
mount -t sysfs sys /mnt/sys
mount -o bind /dev /mnt/dev
mount -t devpts pts /mnt/dev/pts/
chroot /mnt


4. Install mtools and os-prober. mtools is a collection of tools to access Microsoft Operating Systems. os-prober is a utility that detects if there are any other operating systems present. Install them with the following command:

pacman -S mtools os-prober


Restore the GRUB

1. Install a new GRUB bootloader

grub-install /dev/sda


2. Recheck to ensure the that installation has completed without any errors.

grub-install --recheck /dev/sda


3. Configure the freshly installed GRUB bootloader

grub-mkconfig -o /boot/grub/grub.cfg


Once complete, close the terminal and reboot your system.

Cookies help us deliver our services. By using our services, you agree to our use of cookies.