Difference between revisions of "Arch User Repository/fa"

Latest revision as of 16:16, 29 December 2022

Other languages:

Deutsch • ‎English • ‎Türkçe • ‎français • ‎português do Brasil • ‎русский • ‎فارسی • ‎中文（中国大陆）‎

Overview

Use the AUR at your own risk!

No support will be provided by the Manjaro team for any issues that may arise relating to software installations from the AUR. When Manjaro is updated, AUR packages might stop working. This is not a Manjaro issue

Although Manjaro is very close to Arch Linux and mostly compatible —being based on Arch Linux itself— it is not possible to access their official repositories for use in Manjaro. Instead, Manjaro uses its own repositories in order to ensure that any software packages that are accessible, such as system updates and applications, have been fully tested to be compatible and stable before release. It is still possible to access additional software packages from the Arch User Repository (AUR).

The AUR is managed by the Arch Linux user community itself. Although this repository is unofficial, software packages first placed here can eventually make their way into Arch Linux's official (community) repository if they become popular enough.

AUR, as a community maintained repository, present potential risks and problems.

خطرات احتمالی استفاده از بسته‌های AUR

نگارش‌های متعدد از بسته‌های یکسان.
بسته‌های منقضی شده.
بسته‌های نیمه‌کاره یا خراب.
بسته‌های درست پیکربندی نشده‌ای که وابستگی‌های غیر ضروری بارگیری می‌کنند و/یا وابستگی‌های ضروری را بارگیری نمی‌کنند.
بسته‌های مخرب و خبیث (در حالی که فوق‌العاده نادر است)

As such, although much of the software packages provided by the AUR should work, do not expect the installation process to always be quite as straight-forward as when you are using the official Manjaro repositories.

On occasion, it may be necessary to manually identify and install dependencies yourself (such as, after an aborted installation attempt).

Again, there is no guarantee that any installed software will work properly, if at all.

Info

You should become familiar with the manual build process in order to be prepared to troubleshoot problems.

Accessing the AUR

Using GUI Pamac

Open Pamac - the name in menu is Add/Remove Software and navigate to the Preferences page. You will be required to enter your password to access it.At Preferences page → select the Third Party tab → and move the slider to enable AUR support. Be sure you have the necessary files for building applications from source

user $  pamac install base-devel git COPY TO CLIPBOARD

Using commandline Pamac

Info

It is strongly recommended to follow this link AUR website and examine the relevant page(s) for any and all software intended to be installed.

These pages contain comments from both existing users and package developers, which may provide valuable information (such as, warnings and/or solutions to problems). To search for and install software packages from the AUR, the syntax is:

user $  pamac search -a [software package name] COPY TO CLIPBOARD

For example, if wishing to install Google Chrome - first follow this link to all Google Chrome build scripts and verify which package you want to build.Or you can ask pamac - for Google Chrome candidates. Just use the search command and Google Chrome as the query. Look over the results or narrow the search parameters - just remember pamac cannot tell you of any issues with build scripts - only the relevant page. E.g. following this link to the buildscript for Google Chrome

user $  pamac search Google Chrome COPY TO CLIPBOARD

In the example we choose the standard version of Google Chrome. To build the google-chrome package with pamac enter the following and press enter

user $  pamac build google-chrome COPY TO CLIPBOARD

You will be presented with the outcome of the chosen build with all dependencies and you will be asked a couple of questions.

Query to edit build files. This is a precaution to verify that the build scripts does not contain malicious actions.
Query to continue download and install dependencies then download the sources, build and install the app.
You will be asked for your password before anything happens.

Using GUI Octopi

See this guide for enabling AUR support in Octopi.

نصب دستی از اِی‌یوآر

Manual

To do that follow the steps given below:

Be sure you have the necessary files for building applications from source

user $  pamac install base-devel git COPY TO CLIPBOARD

Clone the PKGBUILD

user $  git clone https://aur.archlinux.org/google-chrome.git COPY TO CLIPBOARD

Change directory to cloned folder

user $  cd google-chrome COPY TO CLIPBOARD

To make/compile the package, run:

user $  makepkg -s COPY TO CLIPBOARD

This will build the package and pull in any dependencies needed. Note: it won't pull a dependency from the AUR, only from the Manjaro Repos.. If you list the folder content

user $  ls COPY TO CLIPBOARD

you'll probably find a few new files. You're interested in the one that ends with .pkg.tar.zst

The final event is running $sudo pacman -U on that file

user $  sudo pacman -U google-chrome-ver.rel.bugfix.build-pkgrel.pkg.zst COPY TO CLIPBOARD

And you've done it...the safest way to install from the AUR. This is essentially what most install scripts do for you.

Note: Instead of using sudo pacman -U google-chrome-ver.rel.bugfix.build-pkgrel.pkg.zst can also use:

user $  makepkg -i COPY TO CLIPBOARD

Note: To combine above steps into one:

user $  makepkg -is COPY TO CLIPBOARD

Upgrading the packages installed from the AUR

The following command will upgrade all packages on the system including AUR builds

user $  pamac upgrade -a COPY TO CLIPBOARD

جستارهای وابسته

@@ Line 1: / Line 1: @@
 <languages/>
 __TOC__
+<div lang="en" dir="ltr" class="mw-content-ltr">
 ==Overview==
 {{BoxWarning|Use the AUR at your own risk!|'''No support''' will be provided by the Manjaro team for any issues that may arise relating to software installations from the AUR. When Manjaro is updated, AUR packages might stop working. '''This is not a Manjaro issue'''}}
 Although Manjaro is very close to Arch Linux and mostly compatible &mdash;being based on Arch Linux itself&mdash; it is not possible to access their official repositories for use in Manjaro. Instead, Manjaro uses its own repositories in order to ensure that any software packages that are accessible, such as system updates and applications, have been fully tested to be compatible and stable before release. It is still possible to access additional software packages from the ''[https://wiki.archlinux.org/index.php/AUR Arch User Repository]'' (AUR).
+</div>
-The AUR is managed by the Arch Linux user community itself. Although this repository is unofficial, software packages first placed here can eventually make their way into Arch Linux's official (community) repository if they become popular enough.
+<div lang="en" dir="ltr" class="mw-content-ltr">
+The AUR is managed by the Arch Linux user community itself. Although this repository is unofficial, software packages first placed here can eventually make their way into Arch Linux's official (community) repository if they become popular enough.
+</div>
-'''AUR, as a community maintained repository, present potential risks and problems.'''
+<div lang="en" dir="ltr" class="mw-content-ltr">
+'''AUR, as a community maintained repository, present potential risks and problems.'''
+</div>
-Possible risks using AUR packages:
+خطرات احتمالی استفاده از بسته‌های AUR
-* Multiple versions of the same packages.
+* نگارش‌های متعدد از بسته‌های یکسان.
-* Out of date packages.
+* بسته‌های منقضی شده.
-* Broken or only partially working packages.
+* بسته‌های نیمه‌کاره یا خراب.
-* Improperly configured packages which download unnecessary dependencies, or do not download necessary dependencies, or both.
+* بسته‌های درست پیکربندی نشده‌ای که وابستگی‌های غیر ضروری بارگیری می‌کنند و/یا وابستگی‌های ضروری را بارگیری نمی‌کنند.
-* Malicious packages (although extremely rare).
+* بسته‌های مخرب و خبیث (در حالی که فوق‌العاده نادر است)
-As such, although much of the software packages provided by the AUR should work, do not expect the installation process to always be quite as straight-forward as when you are using the official Manjaro repositories.
+<div lang="en" dir="ltr" class="mw-content-ltr">
+As such, although much of the software packages provided by the AUR should work, do not expect the installation process to always be quite as straight-forward as when you are using the official Manjaro repositories.
+</div>
-On occasion, it may be necessary to manually identify and install dependencies yourself (such as, after an aborted installation attempt).
+<div lang="en" dir="ltr" class="mw-content-ltr">
+On occasion, it may be necessary to manually identify and install dependencies yourself (such as, after an aborted installation attempt).
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
 '''Again, there is no guarantee that any installed software will work properly, if at all.'''
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
 {{Important|You should become familiar with the manual build process in order to be prepared to troubleshoot problems.}}
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
 ==Accessing the AUR==
 ===Using GUI [[Pamac]]===
 Open Pamac - the name in menu is ''Add/Remove Software'' and navigate to the Preferences page. You will be required to enter your password to access it.At Preferences page &rarr; select the Third Party tab &rarr; and move the slider to enable AUR support. Be sure you have the necessary files for building applications from source
 {{UserCmd|command=pamac install base-devel git}}
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
 ===Using commandline [[Pamac]]===
 {{Important|It is '''strongly''' recommended to follow this link [https://aur.archlinux.org/ AUR website] and examine the relevant page(s) for any and all software intended to be installed.}}
 These pages contain comments from both existing users and package developers, which may provide valuable information (such as, warnings and/or solutions to problems). To search for and install software packages from the AUR, the syntax is:
 {{UserCmd|command=pamac search -a [software package name]}}
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
 For example, if wishing to install ''Google Chrome'' - first follow this link to '''[https://aur.archlinux.org/packages/?K=google-chrome all Google Chrome build scripts]''' and verify which package you want to build.Or you can ask pamac - for ''Google Chrome'' candidates. Just use the search command and ''Google Chrome'' as the query. Look over the results or narrow the search parameters - just remember pamac cannot tell you of any issues with build scripts - only the relevant page. E.g. following this link to the '''[https://aur.archlinux.org/packages/google-chrome buildscript for Google Chrome]'''
 {{UserCmd|command=pamac search Google Chrome}}
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
 In the example we choose the standard version of ''Google Chrome''. To build the ''google-chrome'' package with '''pamac''' enter the following and press enter
 {{UserCmd|command=pamac build google-chrome}}
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
 You will be presented with the outcome of the chosen build with all dependencies and you will be asked a couple of questions.
 # Query to edit build files. This is a precaution to verify that the build scripts does not contain malicious actions.
 # Query to continue download and install dependencies then download the sources, build and install the app.
 # You will be asked for your password before anything happens.
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
 ===Using GUI [[Octopi]]===
 See [[Octopi#Accessing_the_AUR|this guide]] for enabling AUR support in Octopi.
+</div>
 ===نصب دستی از اِی‌یوآر===
+<div lang="en" dir="ltr" class="mw-content-ltr">
 ====Manual====
 To do that follow the steps given below:
 * Be sure you have the necessary files for building applications from source
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
 {{UserCmd|command=pamac install base-devel git}}
 * Clone the PKGBUILD
@@ Line 68: / Line 97: @@
 {{UserCmd|command=sudo pacman -U google-chrome-ver.rel.bugfix.build-pkgrel.pkg.zst}}
 And you've done it...the safest way to install from the AUR. This is essentially what most install scripts do for you.
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
 ''Note:'' Instead of using ''sudo pacman -U google-chrome-ver.rel.bugfix.build-pkgrel.pkg.zst'' can also use:
 {{UserCmd|command=makepkg -i}}
 ''Note:'' To combine above steps into one:
 {{UserCmd|command=makepkg -is}}
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
 ===Upgrading the packages installed from the AUR===
 The following command will upgrade '''all''' packages on the system including AUR builds
 {{UserCmd|command=pamac upgrade -a}}
+</div>
-==جستار های وابسته==
+<div class="mw-translate-fuzzy">
+==جستارهای وابسته==
 * [http://wiki.manjaro.org/index.php?title=Pacman پَکمَن]
 * [http://wiki.manjaro.org/index.php?title=Pacman_Tips نکته‌های پَکمَن]
+</div>
+<div lang="en" dir="ltr" class="mw-content-ltr">
 [[Category:Contents Page{{#translation:}}]]
 [[Category:Software Management{{#translation:}}]]
+</div>