Difference between revisions of "Btrfs"

22 bytes removed ,  3 months ago
m
musage removed
(Marked this version for translation)
m (musage removed)
Line 259: Line 259:
Because a complete balance may take '''a long time''', there is the possibility of filters in balance. When using a filter only those chunks will be balanced, that are named by the filter.
Because a complete balance may take '''a long time''', there is the possibility of filters in balance. When using a filter only those chunks will be balanced, that are named by the filter.
* '''balance''' all chunks that are less than 50% full. This '''will''' take some time !
* '''balance''' all chunks that are less than 50% full. This '''will''' take some time !
{{RootCmd|command=btrfs balance start -musage=50 -dusage=50 /}}
{{RootCmd|command=btrfs balance start -dusage=50 /}}
* '''balance''' all chunks that are less than 90% full. This '''will''' take some time !
* '''balance''' all chunks that are less than 90% full. This '''will''' take some time !
{{RootCmd|command=btrfs balance start -musage=90 -dusage=90 /}}
{{RootCmd|command=btrfs balance start -dusage=90 /}}
{{BoxWarning|Don't use filters higher than 90%|This is unnecessary on an SSD drive. On a hard drive, this will put a lot of strain on the disk. Even with today's hard drives (>2TB), it may take a very long time. (e.g. 24 hours or more)}}
{{BoxWarning|Don't use filters higher than 90%|This is unnecessary on an SSD drive. On a hard drive, this will put a lot of strain on the disk. Even with today's hard drives (>2TB), it may take a very long time. (e.g. 24 hours or more)}}


translator
1,001

edits