Difference between revisions of "Manjaro-tools"

imported>Fhdk
m
 
(9 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
<languages/>
__TOC__
__TOC__


<translate>
= Introduction = <!--T:1-->


= Introduction =
<!--T:2-->
 
''manjaro-tools'' consists of a lot of different tools aimed at Manjaro developers. It is split into 3 different packages:
''manjaro-tools'' consists of a lot of different tools aimed at Manjaro developers. It is splitted into 3 different packages:
* ''manjaro-tools-base'' contains basic tools, different chroot tools, and ''buildset''
* ''manjaro-tools-base'' contains basic tools, different chroot tools, and ''buildset''
* ''manjaro-tools-pkg'' contains small helper tools, ''buildpkg'', and ''buildtree''
* ''manjaro-tools-pkg'' contains small helper tools, ''buildpkg'', and ''buildtree''
Line 11: Line 12:




All of these ''manjaro-tools'' packages are replacements for [[devtools]] and [[manjaroiso]].  
<!--T:3-->
All of these ''manjaro-tools'' packages are replacements for '''devtools''' and '''manjaroiso'''.  


A detailed user manual is available at [https://github.com/manjaro/manjaro-tools github].
<!--T:4-->
A detailed user manual is available at [https://gitlab.manjaro.org/tools/development-tools/manjaro-tools gitlab].




= Configuration =
= Configuration = <!--T:5-->


manjaro-tools can be configured by copying the folder ''/etc/manjaro-tools'' to your home in ''~/.config'' folder and then edit the file {{ic|''./config/manjaro-tools/manjaro-tools.conf''}}
<!--T:6-->
manjaro-tools can be configured by copying the folder ''/etc/manjaro-tools'' to your home in ''~/.config'' folder and then edit the file {{ic|''~/.config/manjaro-tools/manjaro-tools.conf''}}


= Files =
= Files = <!--T:7-->


<!--T:8-->
These are the new names for renamed scripts.
These are the new names for renamed scripts.


<!--T:9-->
*    mkmanjaroroot --> mkchroot
*    mkmanjaroroot --> mkchroot
*    manjarobuild --> buildpkg
*    manjarobuild --> buildpkg
Line 32: Line 38:




= buildset =
= buildset = <!--T:10-->


<!--T:11-->
buildset is used to create build lists. Build lists can be defined in {{ic|/etc/manjaro-tools/sets/<buildlistname>.set}}
buildset is used to create build lists. Build lists can be defined in {{ic|/etc/manjaro-tools/sets/<buildlistname>.set}}


<!--T:12-->
The help looks like the following:
The help looks like the following:


  $ buildset -h
  <!--T:13-->
{{UserCmdOutput|command=buildset -h|result=
<pre>
  Usage: buildset [options]
  Usage: buildset [options]
     -c <name>  Create set
     -c <name>  Create set
Line 46: Line 56:
     -q          Query sets
     -q          Query sets
     -h          This help
     -h          This help
</pre>
}}


<!--T:14-->
{{Note|The set name should be different from a directory name in pkgbuilds dir. Anything else should work, eg adding a date to the name.}}
{{Note|The set name should be different from a directory name in pkgbuilds dir. Anything else should work, eg adding a date to the name.}}


= buildpkg =
= buildpkg = <!--T:15-->


<!--T:16-->
buildpkg is used to build a particular package or a set. In the following chapter all functions of buildpkg get explained.  
buildpkg is used to build a particular package or a set. In the following chapter all functions of buildpkg get explained.  


<!--T:17-->
If you want a detailed example how to use buildpkg to build packages for a local repository, please look [https://wiki.manjaro.org/index.php?title=Buildiso_with_AUR_packages:_Using_buildpkg here].
If you want a detailed example how to use buildpkg to build packages for a local repository, please look [https://wiki.manjaro.org/index.php?title=Buildiso_with_AUR_packages:_Using_buildpkg here].
In some cases, the documentation of buildpkg's predecessor might be helpful: [[Devtools]].




<!--T:18-->
The help looks like the following:
The help looks like the following:


  Usage: buildpkg [options]
  <!--T:19-->
{{UserCmdOutput|command=buildpkg -h|result=
<pre>
Usage: buildpkg [options]
     -a <arch>          Arch [default: x86_64]
     -a <arch>          Arch [default: x86_64]
     -b <branch>        Branch [default: stable]
     -b <branch>        Branch [default: stable]
Line 73: Line 90:
     -s                Sign packages
     -s                Sign packages
     -w                Clean up cache and sources
     -w                Clean up cache and sources
</pre>
}}


<!--T:20-->
To build a single package, go into the directory which is one above the package build directory (which contains the PKGBUILD), and run it as:
To build a single package, go into the directory which is one above the package build directory (which contains the PKGBUILD), and run it as:


  buildpkg -p <package-name>
  <!--T:21-->
{{UserCmd|command=buildpkg -p package-name}}


<!--T:22-->
To build a set the name of the set can be used. The current sets can be queried with the {{ic|-q}} option.
To build a set the name of the set can be used. The current sets can be queried with the {{ic|-q}} option.


= buildtree =
= buildtree = <!--T:23-->


<!--T:24-->
buildtree is a little tools to sync arch abs and manjaro packages git repos.
buildtree is a little tools to sync arch abs and manjaro packages git repos.


<!--T:25-->
The arguments are:
The arguments are:


  $ buildtree -h
  <!--T:26-->
{{UserCmdOutput|command=buildtree -h|result=
<pre>
  Usage: buildtree [options]
  Usage: buildtree [options]
     -s            Sync manjaro tree
     -s            Sync manjaro tree
Line 93: Line 119:
     -q            Query settings
     -q            Query settings
     -h            This help[/code]
     -h            This help[/code]
</pre>
}}


<!--T:27-->
To sync Arch and Manjaro trees:
To sync Arch and Manjaro trees:


  buildtree -as
  <!--T:28-->
{{UserCmd|command=buildtree -as}}


= buildiso = <!--T:29-->


= buildiso =
<!--T:30-->
 
buildiso is used to build a particular ISO or a set of ISOs. All functions of buildiso will be explained in the following chapters.
buildiso is used to build a particular ISO or a set of ISOs. All functions of buildiso will be explained in the following chapters.


If you want a detailed guide how to use buildiso to build your own Manjaro ISOs from scatch, please look [https://wiki.manjaro.org/index.php?title=Build_Manjaro_ISOs_with_buildiso here].
<!--T:31-->
If you want a detailed guide how to use buildiso to build your own Manjaro ISOs from scratch, please look [https://wiki.manjaro.org/index.php?title=Build_Manjaro_ISOs_with_buildiso here].




== Overview ==
== Overview == <!--T:32-->


<!--T:33-->
The help looks like the following for x86_64:
The help looks like the following for x86_64:


$ buildiso -h
<!--T:34-->
{{UserCmdOutput|command=buildiso -h|result=
<pre>
  Usage: buildiso [options]
  Usage: buildiso [options]
     -p <profile>      Buildset or profile [default: default]
     -p <profile>      Buildset or profile [default: default]
Line 126: Line 160:
     -q                Query settings and pretend build
     -q                Query settings and pretend build
     -h                This help
     -h                This help
</pre>
}}


== Query Building ==
== Query Building == <!--T:35-->


<!--T:36-->
To query build an ISO ('''-q''' option), for example the xfce-openbox-openrc profile, the following command can be used:
To query build an ISO ('''-q''' option), for example the xfce-openbox-openrc profile, the following command can be used:


<!--T:37-->
{{UserCmdOutput|command=buildiso -p xfce -qv|result=
<pre>
<pre>
~ >>> buildiso -p xfce -qv                                                         
[sudo] password for fh:
==> manjaro-tools
==> manjaro-tools
   -> version: 0.15.9
   -> version: 0.15.9
Line 177: Line 214:
   -> disable_systemd: pacman-init
   -> disable_systemd: pacman-init
</pre>
</pre>
}}


== Building ==
== Building == <!--T:38-->


<!--T:39-->
To actually build the ISO:
To actually build the ISO:


  $ buildiso -p xfce -b stable
  <!--T:40-->
{{UserCmd|command=buildiso -p xfce -b stable}}


== Building with predownloaded Xorg packages ==
== Building with predownloaded Xorg packages == <!--T:41-->


<!--T:42-->
To build an ISO while retaining the previously downloaded cache of Xorg packages, the '''-x''' option can be used:
To build an ISO while retaining the previously downloaded cache of Xorg packages, the '''-x''' option can be used:


  $ buildiso -p xfce-openbox-openrc/ -b stable -x
  <!--T:43-->
{{UserCmd|command=buildiso -p xfce-openbox-openrc/ -b stable -x}}


== Building with a small config change ==
== Building with a small config change == <!--T:44-->


<!--T:45-->
{{Note| It is to be verified if the procedure given below works or not.}}
{{Note| It is to be verified if the procedure given below works or not.}}


<!--T:46-->
Supposing something only changed in config, like a setting, instead of building the whole ISO from scratch, the ISO build directory can be modified and the ISO can be rebuilt. For example, supposing one changed ''xfce-overlay/etc/skel/.conkyrc'' in the config, one can go into the work directory, modify the said file, and rebuild the ISO using the '''-cs''' option.
Supposing something only changed in config, like a setting, instead of building the whole ISO from scratch, the ISO build directory can be modified and the ISO can be rebuilt. For example, supposing one changed ''xfce-overlay/etc/skel/.conkyrc'' in the config, one can go into the work directory, modify the said file, and rebuild the ISO using the '''-cs''' option.


The work directory can be found using the '''-''' option:
<!--T:47-->
The work directory can be found using the '''-h''' option:


  ~ >>> buildiso -h                                                                                  
  <!--T:48-->
{{UserCmdOutput|command=buildiso -h|result=                 
<pre>
  Usage: buildiso [options]
  Usage: buildiso [options]
     -p <profile>      Buildset or profile [default: default]
     -p <profile>      Buildset or profile [default: default]
Line 222: Line 269:
     -q                Query settings and pretend build
     -q                Query settings and pretend build
     -h                This help
     -h                This help
</pre>
}}


<!--T:49-->
    -r <dir>          Chroots directory
                        [default: '''/var/lib/manjaro-tools/buildiso''']
(work directory highlighted in bold)
(work directory highlighted in bold)


<!--T:50-->
The required file can be edited as root, for example:
The required file can be edited as root, for example:
$ sudo nano /var/lib/manjaro-tools/buildiso/xfce/x86_64/desktopfs/etc/skel/.conkyrc
{{UserCmd|command=sudo nano /var/lib/manjaro-tools/buildiso/xfce/x86_64/desktopfs/etc/skel/.conkyrc}}


<!--T:51-->
There is a catch involved here though; the file one wants to edit may be present in multiple images, like rootfs, livefs, desktopfs), and would need to be edited in the respective image directories.
There is a catch involved here though; the file one wants to edit may be present in multiple images, like rootfs, livefs, desktopfs), and would need to be edited in the respective image directories.




<!--T:52-->
Then the ISO then can be rebuilt as:
Then the ISO then can be rebuilt as:
$ buildiso -p xfce -cs
{{UserCmd|command=buildiso -p xfce -cs}}


=== Alternative ===
=== Alternative === <!--T:53-->


<!--T:54-->
First only the chroot for the ISO could be created, using the {{ic|-i}} option, then the changes can be made, and finally an ISO can be built with the {{ic|-sc}} option.
First only the chroot for the ISO could be created, using the {{ic|-i}} option, then the changes can be made, and finally an ISO can be built with the {{ic|-sc}} option.


<!--T:55-->
For example:
For example:


  $ buildiso -p xfce -b stable -x
  <!--T:56-->
{{UserCmdOutput|command=buildiso -p xfce -b stable -x|result=
<pre>
==> Start building [xfce]
==> Start building [xfce]
==> Cleaning up ...
==> Cleaning up ...
   -> Deleting chroot [rootfs] (x86_64) ...
   -> Deleting chroot [rootfs] (x86_64) ...
   -> Deleting isoroot [iso] ...
   -> Deleting isoroot [iso] ...
...
[..]
...
</pre>
}}


<!--T:57-->
After this the changes in the work directory can be made, and the ISO can be generated with:
After this the changes in the work directory can be made, and the ISO can be generated with:


  $ buildiso -p xfce/ -cz
  <!--T:58-->
{{UserCmd|command=buildiso -p xfce/ -cz}}


= Further reading =
= See Also = <!--T:59-->


<!--T:60-->
* [https://gitlab.manjaro.org/tools/development-tools/manjaro-tools Manjaro Gitlab]
* [https://gitlab.manjaro.org/tools/development-tools/manjaro-tools Manjaro Gitlab]
* [[Build Manjaro ISOs with buildiso]]
* [[Build Manjaro ISOs with buildiso]]
</translate>


 
[[Category:Contents Page{{#translation:}}]]
[[Category:Contents Page]]

Latest revision as of 08:29, 9 December 2022

Other languages:
English • ‎русский

Introduction

manjaro-tools consists of a lot of different tools aimed at Manjaro developers. It is split into 3 different packages:

  • manjaro-tools-base contains basic tools, different chroot tools, and buildset
  • manjaro-tools-pkg contains small helper tools, buildpkg, and buildtree
  • manjaro-tools-iso contains small helper tools and buildiso


All of these manjaro-tools packages are replacements for devtools and manjaroiso.

A detailed user manual is available at gitlab.


Configuration

manjaro-tools can be configured by copying the folder /etc/manjaro-tools to your home in ~/.config folder and then edit the file ~/.config/manjaro-tools/manjaro-tools.conf

Files

These are the new names for renamed scripts.

  • mkmanjaroroot --> mkchroot
  • manjarobuild --> buildpkg
  • mkset --> buildset
  • pacstrap --> basestrap
  • genfstab --> fstabgen
  • arch-chroot --> manjaro-chroot


buildset

buildset is used to create build lists. Build lists can be defined in /etc/manjaro-tools/sets/<buildlistname>.set

The help looks like the following:


$ buildset -h

 Usage: buildset [options]
     -c <name>   Create set
     -r <name>   Remove set
     -s <name>   Show set
     -i          Iso mode
     -q          Query sets
     -h          This help


Note
The set name should be different from a directory name in pkgbuilds dir. Anything else should work, eg adding a date to the name.

buildpkg

buildpkg is used to build a particular package or a set. In the following chapter all functions of buildpkg get explained.

If you want a detailed example how to use buildpkg to build packages for a local repository, please look here.


The help looks like the following:


$ buildpkg -h

Usage: buildpkg [options]
    -a <arch>          Arch [default: x86_64]
    -b <branch>        Branch [default: stable]
    -c                 Recreate chroot
    -h                 This help
    -i <pkg>           Install a package into the working copy of the chroot
    -n                 Install and run namcap check
    -p <pkg>           Build list or pkg [default: default]
    -q                 Query settings and pretend build
    -r <dir>           Chroots directory
                       [default: /var/lib/manjaro-tools/buildpkg]
    -s                 Sign packages
    -w                 Clean up cache and sources


To build a single package, go into the directory which is one above the package build directory (which contains the PKGBUILD), and run it as:

user $ buildpkg -p package-name COPY TO CLIPBOARD


To build a set the name of the set can be used. The current sets can be queried with the -q option.

buildtree

buildtree is a little tools to sync arch abs and manjaro packages git repos.

The arguments are:


$ buildtree -h

 Usage: buildtree [options]
     -s            Sync manjaro tree
     -a            Sync arch abs
     -c            Clean package tree
     -q            Query settings
     -h            This help[/code]


To sync Arch and Manjaro trees:

user $ buildtree -as COPY TO CLIPBOARD


buildiso

buildiso is used to build a particular ISO or a set of ISOs. All functions of buildiso will be explained in the following chapters.

If you want a detailed guide how to use buildiso to build your own Manjaro ISOs from scratch, please look here.


Overview

The help looks like the following for x86_64:


$ buildiso -h

 Usage: buildiso [options]
     -p <profile>       Buildset or profile [default: default]
     -a <arch>          Arch [default: x86_64]
     -b <branch>        Branch [default: stable]
     -r <dir>           Chroots directory
                        [default: /var/lib/manjaro-tools/buildiso]
     -c                 Disable clean work dir
     -x                 Clean xorg cache
     -l                 Clean lng cache
     -i                 Build images only
     -s                 Generate iso only
                        Requires pre built images (-i)
     -v                 Verbose output, show profies detail (-q)
     -q                 Query settings and pretend build
     -h                 This help


Query Building

To query build an ISO (-q option), for example the xfce-openbox-openrc profile, the following command can be used:


$ buildiso -p xfce -qv

==> manjaro-tools
  -> version: 0.15.9
  -> config: ~/.config/manjaro-tools/manjaro-tools.conf
==> PROFILE:
  -> build_lists: community|default|manjaro|sonar|v17-release
  -> build_list_iso: xfce
  -> is_build_list: false
==> OPTIONS:
  -> arch: x86_64
  -> branch: unstable
  -> kernel: linux419
==> ARGS:
  -> clean_first: true
  -> images_only: false
  -> iso_only: false
  -> persist: false
==> DIST SETTINGS:
  -> dist_name: Manjaro
  -> dist_release: 18.0
  -> dist_codename: Illyria
==> ISO INFO:
  -> iso_label: MJRO180
  -> iso_compression: xz
==> BUILD QUEUE:
 --> Profile: [xfce]
  -> iso_file: manjaro-xfce-18.0-unstable-minimal-x86_64.iso
  -> autologin: true
  -> nonfree_mhwd: true
  -> multilib: true
  -> extra: false
  -> netinstall: false
  -> chrootcfg: false
  -> geoip: true
  -> efi_boot_loader: grub
  -> hostname: manjaro
  -> username: manjaro
  -> password: manjaro
  -> login_shell: /bin/bash
  -> addgroups: lp,network,power,sys,wheel
  -> enable_systemd: avahi-daemon bluetooth cronie ModemManager NetworkManager org.cups.cupsd tlp tlp-sleep ufw lightdm
  -> enable_systemd_live: manjaro-live mhwd-live pacman-init mirrors-live
  -> disable_systemd: pacman-init


Building

To actually build the ISO:

user $ buildiso -p xfce -b stable COPY TO CLIPBOARD


Building with predownloaded Xorg packages

To build an ISO while retaining the previously downloaded cache of Xorg packages, the -x option can be used:

user $ buildiso -p xfce-openbox-openrc/ -b stable -x COPY TO CLIPBOARD


Building with a small config change

Note
It is to be verified if the procedure given below works or not.

Supposing something only changed in config, like a setting, instead of building the whole ISO from scratch, the ISO build directory can be modified and the ISO can be rebuilt. For example, supposing one changed xfce-overlay/etc/skel/.conkyrc in the config, one can go into the work directory, modify the said file, and rebuild the ISO using the -cs option.

The work directory can be found using the -h option:


$ buildiso -h

 Usage: buildiso [options]
     -p <profile>       Buildset or profile [default: default]
     -a <arch>          Arch [default: x86_64]
     -b <branch>        Branch [default: unstable]
     -r <dir>           Chroots directory
                        [default: '''/var/lib/manjaro-tools/buildiso''']
     -t <dir>           Target directory
                        [default: /home/fh/Data/build/iso]
     -k <name>          Kernel to use
                        [default: linux419]
     -g <key>           The gpg key for sfs signing
                        [default: ]
     -m                 Set SquashFS image mode to persistence
     -c                 Disable clean work dir
     -f                 Build full ISO (extra=true)
     -d <comp>          Compression used for build ISO: xz, gzip, lzma, lzo, lz4
                        [default: xz]
     -x                 Build images only
     -z                 Generate iso only
                        Requires pre built images (-x)
     -v                 Verbose output to log file, show profile detail (-q)
     -q                 Query settings and pretend build
     -h                 This help


    -r <dir>           Chroots directory
                       [default: /var/lib/manjaro-tools/buildiso]

(work directory highlighted in bold)

The required file can be edited as root, for example:

user $ sudo nano /var/lib/manjaro-tools/buildiso/xfce/x86_64/desktopfs/etc/skel/.conkyrc COPY TO CLIPBOARD


There is a catch involved here though; the file one wants to edit may be present in multiple images, like rootfs, livefs, desktopfs), and would need to be edited in the respective image directories.


Then the ISO then can be rebuilt as:

user $ buildiso -p xfce -cs COPY TO CLIPBOARD


Alternative

First only the chroot for the ISO could be created, using the -i option, then the changes can be made, and finally an ISO can be built with the -sc option.

For example:


$ buildiso -p xfce -b stable -x

==> Start building [xfce]
==> Cleaning up ...
  -> Deleting chroot [rootfs] (x86_64) ...
  -> Deleting isoroot [iso] ...
[..]


After this the changes in the work directory can be made, and the ISO can be generated with:

user $ buildiso -p xfce/ -cz COPY TO CLIPBOARD


See Also