Difference between revisions of "VMware"

Latest revision as of 12:15, 29 June 2024

Other languages:

English • ‎Türkçe • ‎português do Brasil • ‎русский • ‎中文（中国大陆）‎

VMware Workstation on Manjaro

DISCLAIMER

Tip

Read the VMware Workstation 16 supported OS article.

VMware is a commercially developed application with a limited list of supported operating systems.

This guide is a courtesy to the forum don't expect any support on VMware related issues.

As you can see from above reference - Archlinux and derivatives are unsupported platforms for running VMware products and as such it is unsupported on Manjaro.

So even when it is possible to install and run VMware on Manjaro - **do not expect support** on configuration of virtual machines or system issues arising from your VMware installation. You must have the required level of troubleshooting skills to solve these when they arise - and they will.

If you need help configuring vmware virtual machines - your should look in the VMware documentation.
If you need help troubleshooting installation issues - use the comment section for the AUR PKGBUILD

How to use the AUR PKGBUILD

There is a lot of AUR helpers and they all mimic what you should do manually - the Arch way is usually the best way.

Important kernel precaution

The AUR PKGBUILD is created for Archlinux and therefore the kernel headers dependency must be solved manually on Manjaro. Archlinux only have two kernel versions - linux and linux-lts.

Archlinux kernels follow the release schedule on kernel.org and on Manjaro you will need to use the same kernel versions which - at the time of writing in March 2021 - is (check with https://kernel.org if in doubt)

Linux 5.10.x (LTS)
Linux 5.11.x (mainline)

Using other kernels - like 5.4LTS - will most likely fail.

Building steps

1. Update your system and install the necessary build tools

user $  sudo pacman -Syu git base-devel --needed COPY TO CLIPBOARD

2. Then check your kernel version(s) - example - remember to use the same version as Arch

user $  mhwd-kernel -li COPY TO CLIPBOARD

3. Then install the headers for your kernel(s) and dkms. Substitute $KERNELXYY with your currently running kernel

user $  sudo pacman -Syu $KERNELXYY-headers dkms COPY TO CLIPBOARD

4. Clone the PKGBUILKD script

user $  git clone  https://aur.archlinux.org/vmware-workstation.git ~/vmware-workstation COPY TO CLIPBOARD

5. Familiarize yourself with the content - it is all text files and you should read them and verify what they are doing.

user $  ls ~/vmware-workstation COPY TO CLIPBOARD

6. When you are satisfied - cd into the folder

user $  cd ~/vmware-workstation COPY TO CLIPBOARD

7. Run makepkg to install dependencies, build and install the package.

user $  makepkg -is COPY TO CLIPBOARD

The installer will write messages in the terminal on what to do next - follow the directions to load the kernel modules and enable vmware network service and usb service as needed.

user $  sudo modprobe -a vmw_vmci vmmon COPY TO CLIPBOARD

Optional services

There are three services that can be optionally be enabled:

vmware-networks.service: Provides network access inside VMs, most people will want this enabled
vmware-usbarbitrator.service: Allows USB devices to be connected inside VMs
vmware-hostd.service: Enables sharing of VMs on the network

To start and enable vmware network

user $  sudo systemctl enable --now vmware-networks.service COPY TO CLIPBOARD

To start and enable usb passthrough

user $  sudo systemctl enable --now vmware-usbarbitrator.service COPY TO CLIPBOARD

To start and enable the sharing of a virtual machine

user $  sudo systemctl enable --now vmware-hostd.service COPY TO CLIPBOARD

Installing Manjaro under VMWare

There are no special requirements to installing Manjaro on VMWare. open-vmware-tools is pre-installed. It should "just work"

Copy and Paste

Ensure you are using Xorg as Wayland has some limitations. See: https://kb.vmware.com/s/article/74671

If copy and paste does not work, you may need to install gtkmm3 and re-boot. vmware-user-suid-wrapper depends on gtkmm, but it's not a required dependency of the package. See: https://bugs.archlinux.org/task/43159

Resources

@@ Line 1: / Line 1: @@
+<languages/>
+__TOC__
+<translate>
+== VMware Workstation on Manjaro == <!--T:1-->
+=== '''DISCLAIMER''' ===
+{{BoxSuccess|Tip|'''Read the [https://kb.vmware.com/s/article/80807 VMware Workstation 16 supported OS] article'''.
+<p>VMware is a commercially developed application with a limited list of supported operating systems.</p>
+<p>This guide is a courtesy to the forum '''don't expect any support''' on VMware related issues.</p>}}
+As you can see from above reference - Archlinux and derivatives are unsupported platforms for running VMware products and as such it is unsupported on Manjaro.
+So even when it is possible to install and run VMware on Manjaro - **do not expect support** on configuration of virtual machines or system issues arising from your VMware installation.  You must have the required level of troubleshooting skills to solve these when they arise - and they will.
+* If you need help configuring vmware virtual machines - your should look in the VMware documentation.
+* If you need help troubleshooting installation issues - use the comment section for the AUR PKGBUILD
+== How to use the AUR PKGBUILD == <!--T:2-->
+There is a lot of AUR helpers and they all mimic what you should do manually - the Arch way is usually the best way.
+=== Important kernel precaution ===
+The AUR PKGBUILD is created for Archlinux and therefore the kernel headers dependency must be solved manually on Manjaro. Archlinux only have two kernel versions - linux and linux-lts.
-= Advice, Tips, and Tricks =
+Archlinux kernels follow the release schedule on kernel.org and on Manjaro you will need to use the same kernel versions which - at the time of writing in March 2021 - is (check with https://kernel.org if in doubt)
+* '''Linux 5.10.x (LTS)'''
+* '''Linux 5.11.x (mainline)'''
+Using other kernels - like 5.4LTS - will most likely fail.
+=== Building steps === <!--T:3-->
+. Update your system and install the necessary build tools
+{{UserCmd|command=sudo pacman -Syu git base-devel --needed}}
+. Then check your kernel version(s) - example - remember to use the same version as Arch
+{{UserCmd|command=mhwd-kernel -li}}
+. Then install the headers for your kernel(s) and dkms. Substitute ''$KERNELXYY'' with your currently running kernel
+{{UserCmd|command=sudo pacman -Syu $KERNELXYY-headers dkms}}
+. Clone the PKGBUILKD script
+{{UserCmd|command=git clone <nowiki> https://aur.archlinux.org/vmware-workstation.git</nowiki> ~/vmware-workstation}}
+. Familiarize yourself with the content - it is all text files and you should read them and verify what they are doing.
+{{UserCmd|command=ls ~/vmware-workstation}}
+. When you are satisfied - cd into the folder
+{{UserCmd|command=cd ~/vmware-workstation}}
+. Run makepkg to install dependencies, build and install the package.
+{{UserCmd|command=makepkg -is}}
+The installer will write messages in the terminal on what to do next - follow the directions to load the kernel modules and enable vmware network service and usb service as needed.
+{{UserCmd|command=sudo modprobe -a vmw_vmci vmmon}}
+=== Optional services ===
+There are three services that can be optionally be enabled:
+* vmware-networks.service: Provides network access inside VMs, most people will want this enabled
+* vmware-usbarbitrator.service: Allows USB devices to be connected inside VMs
+* vmware-hostd.service: Enables sharing of VMs on the network
+To start and enable vmware network
+{{UserCmd|command=sudo systemctl enable --now vmware-networks.service}}
+To start and enable usb passthrough
+{{UserCmd|command=sudo systemctl enable --now vmware-usbarbitrator.service}}
+To start and enable the sharing of a virtual machine
+{{UserCmd|command=sudo systemctl enable --now vmware-hostd.service}}
+== Installing Manjaro under VMWare ==
+There are no special requirements to installing Manjaro on VMWare.  '''open-vmware-tools''' is pre-installed.  It should "just work"
+==Copy and Paste==
+Ensure you are using Xorg as Wayland has some limitations.
+See: https://kb.vmware.com/s/article/74671
-==Creating your Virtual Machine==
+<!--T:4-->
+If copy and paste does not work, you may need to install gtkmm3 and re-boot.
+vmware-user-suid-wrapper depends on gtkmm, but it's not a required dependency of the package. See: https://bugs.archlinux.org/task/43159
-* Start VMware.
+== Resources == <!--T:5-->
-* When you select '''Create a New Virtual Machine''', a New Virtual Machine Wizard Dialogue box should appear.
+* [https://forum.manjaro.org/t/root-tip-installing-vmware-on-manjaro/57596 Manjaro Forum - (root tip) Installing VMware on Manjaro]
-* Select '''I will install the operating system later.''' and click '''Next'''.
+* [https://kb.vmware.com/s/article/80807 VMware KB - Workstation/Player 16 Supported OS]
-* Select your Guest Operating System '''Linux''', and Version '''Other Linux 3.x kernel''' or '''Other Linux 3.x kernel 64-bit''' and click '''Next'''.
+* [https://forum.manjaro.org/search?q=vmware Manjaro Forum Search - VMware]
-* If desired, rename your Virtual Machine and change its location. Then, click '''Next'''.
+</translate>
-* Specify Disk Capacity (note that the default of 8GB is almost certainly too small). For better performance, Store virtual disk as a single file, but to save space, Split virtual disk into multiple files. Then, click '''Next'''.
+[[Category:Contents Page{{#translation:}}]]
-* Customize Hardware
+[[Category:Virtualisation{{#translation:}}]]
-** Memory: Increase from the default of 384MB to 2GB (for 64-bit Manjaro KDE)
-** New CD/DVD: Change from the default of Use Physical Drive to Use ISO Image file, and point to your ISO.
-** Display: Uncheck Accelerate 3D Graphics
-* Then, close the window, and click '''Finish'''.
-* Then, click '''Play virtual machine'''.
-==Guest Installation==
-* VMware can run installation files (ISOs) directly as ''virtual discs'', so there is no need to burn them to an installation medium such as a disc or USB data stick.
-* The process to install any Guest operating system - '''[[Installation_Guides|including Manjaro]]''' - is exactly the same as if actually installing for real on your computer.
-==VMware Tools==
-{{note|'''Manjaro will already have open-vm-tools pre-installed, so there is no need to add it yourself'''.}}
-The Open Virtual Machine Tools (open-vm-tools) are the open source implementation of VMware Tools. They are special software packages designed to improve the performance and usability of the guest operating systems. They are installed '''within''' the Guest operating system itself, and most notably result in enhancing the display resolution, as well as enabling much better control over the mouse. As such, two tell-tale signs that they have not been installed in a Guest are that the display will not scale to the size of the display window (i.e. it will be necessary to scroll around to see the whole screen), and the mouse may be quite hard to control.
-==Cut and Paste==
-If cut and paste does not work, you may need to install gtkmm and re-boot.
-vmware-user-suid-wrapper depends on gtkmm, but it's not a dependency of the package. See: https://bugs.archlinux.org/task/43159
-==General==
-* Don't be afraid to take risks, to experiment, and to have fun with Guest operating systems. The worst that can happen is that they will have to be re-installed!
-[[Category:Contents Page]]
-[[Category:Virtualisation]]